Tick an accessory: it goes into the cart with this product.
Mid-High Modulus carbon for sharp control
Every input goes through unfiltered to the foil with the Slingshot One-Lock Carbon Mast, a carbon mast that assembles without tools. You get it new, with a discount. On the water, its stiffness gives you sharp control in edges and transitions, and its progressive profile helps you hold your speed.
It is made for intermediate to advanced riders who want a more precise, more responsive foil. Its range covers freeride, surf foil and performance-oriented wingfoil. If you travel often or change setups regularly, the quick assembly saves you time on the beach. The length you choose depends on your board, your foil and how you ride.
Detailed description
Mid-High Modulus carbon for sharp control
The mast is made of Mid-High Modulus carbon, chosen to limit flex. Between your feet and the foil the connection stays direct: when you put angle into an edge or link a transition, the foil responds with no delay. You feel this precision in surf foil, where you draw your lines finely, as in wingfoil, where you re-accelerate often. Feel stays lively and control gets finer in maneuvers.
One-Lock, a quick assembly that is always the same
With the One-Lock, you assemble or disassemble the mast without tools in under 30 seconds. On the beach, that is time saved for the water. The positioning stays the same from one session to the next, so you do not have to readjust everything each outing. If you travel with your foil or often switch from one setup to another, the benefit shows quickly.
A progressive profile on the Slingshot One-Lock Carbon Mast
The profile grows from 118 mm at the foot to 145 mm at the base. This shape reduces drag without sacrificing the intended stiffness. On the water, the mast cuts through better and glide gets more efficient, which helps you keep speed when you work upwind or cross a flat section. Slingshot also built in compatibility with the RTS Mounting Kit, to adjust and refit the foil on your board easily.
Why this price
New item sold at a reduced price. List price 1,099 €, sale price 901 €: you save 198 € (-18%).
A real team behind it
DealsEvolution is run by GlissEvolution, a watersports shop in Pornichet. Same terms of sale, same after-sales service, free pickup at the shop.
Find usSize guide
| Length (cm) | Weight (kg) |
|---|---|
| 72 | 1.72 |
| 82 | 1.92 |
| 92 | 2.05 |
Videos
Choosing the length of your foil mast
The 72 cm gives a compact, maneuverable setup. The 82 cm plays versatility. The 92 cm bets on stability. To decide, consider your height, the foil you are mounting and how you ride, without forgetting the board that will receive the mast.
Frequently asked questions
Which foil should I use with the Slingshot One-Lock Carbon Mast?+
The mast is sold alone, without foil, plate or screw set. Pair it with a plate and a foil compatible with One-Lock and RTS, and a board fitted with the RTS Mounting Kit to simplify adjustments. Choose the foil according to how you ride: freeride, surf or wing.
How much does the Slingshot One-Lock Carbon Mast weigh?+
The weight varies with length: 1.72 kg in 72 cm, 1.92 kg in 82 cm and 2.05 kg in 92 cm.
Does the One-Lock system need tools?+
No, assembly and disassembly are done by hand, in under 30 seconds according to Slingshot. The mast returns to its position each time you reassemble it.
How do I look after the Slingshot One-Lock Carbon Mast?+
Rinse it with fresh water after every session. Check the carbon regularly for cracks or impact marks. Keep the One-Lock system and the RTS fixings clean and lubricated, following the manufacturer's recommendations.
You might also like
See all ›More Slingshot on sale
See all ›Highlights of the Slingshot One-Lock Carbon Mast
- Direct transmission: Carbon stiffness removes unwanted flex, so your inputs reach the foil as they are.
- Tool-free assembly: The One-Lock system assembles and disassembles the foil in under 30 seconds.
- Progressive profile: Its section grows from 118 to 145 mm to reduce drag.
- RTS compatible: The RTS Mounting Kit makes it easy to adjust the position on the board.



Slingshot One-Lock Carbon Mast: stiffness, assembly and profile
Specifications of the One-Lock Carbon mast
| Brand | Slingshot |
| Model | One-Lock Carbon Mast |
| Type | Carbon foil mast |
| Build | Mid-High Modulus Carbon |
| Attachment | One-Lock, tool-free assembly in under 30 seconds |
| Profile | Progressive, from 118 mm (foot) to 145 mm (base) |
| Compatibility | RTS Mounting Kit |
| Lengths and weight | 72 cm: 1.72 kg; 82 cm: 1.92 kg; 92 cm: 2.05 kg |
| Disciplines | Freeride, surf foil, performance wingfoil |
| Rider level | Intermediate to advanced |
| Not included | Foil, plate, screw set, RTS Mounting Kit |
Size guide
Videos
Included / Not Included
- Included: Slingshot One-Lock Carbon mast in its packaging
- Not included: RTS Mounting Kit (if not supplied separately), foil, plate, screw set
Frequently asked questions about the Slingshot One-Lock Carbon Mast
Which foil should I use with the Slingshot One-Lock Carbon Mast?
How much does the Slingshot One-Lock Carbon Mast weigh?
Does the One-Lock system need tools?
How do I look after the Slingshot One-Lock Carbon Mast?
Original specifications: Slingshot One-Lock Carbon Mast on GlissEvolution.
Customer reviews
Loading reviews...