Wing Foils
Complete foil setups for wing foiling and parts from past ranges: Front Wings, planes and wingsets, fuselages, masts and stabilizers from Duotone, F-ONE, Slingshot and Fanatic, new from previous model years. Your Front Wing area depends on your weight and level. Pay in installments with PayPal or Alma, free pickup in Pornichet.
Learn moreEnd-of-season sub-sections
Wing foil: how to assemble the Front Wing, mast, fuselage and stabilizer
Updated November 2026
Brand-new, never-used wing foil gear from end-of-series stock at Duotone, F-ONE, Slingshot and Fanatic lives in this category, from the complete kit down to single spare parts. Looking for other types of foils? Head to the foils. The crossed-out price is the catalog price, and the drop comes from the model year change. It's a smart way to get kitted out, or to upgrade your foil without replacing the whole setup. The tips below help you pick the surface area, mast length and parts that go together.
Which Front Wing suits your weight and level?
The cm² figure of the Front Wing sets how early you take off and how much lift you keep as you slow down. A larger surface forgives more. A smaller one is faster and reacts more sharply.
As a guide, a beginner between 55 and 70 kg starts on 1 300 to 1 600 cm², from 70 to 85 kg on 1 500 to 1 900 cm², and from 85 to 100 kg on 1 800 to 2 200 cm². Advanced freeride riders drop to 900 to 1 200 cm², 1 000 to 1 300 cm² and 1 200 to 1 500 cm² across the same weight bands. For waves and speed, count on 700 to 900 cm², 800 to 1 000 cm² then 900 to 1 100 cm².
Aspect ratio comes next. A low aspect ratio gives a stable wing that pivots in a tight radius. A high aspect ratio glides further between pumps but forgives less. Use these two criteria to sort the Front Wings in this category.
Which mast length and material should you choose?
The mast links the foil to the board and sets your flying height. On shallow water, 70 cm is enough. To learn, and at most spots, 75 to 85 cm works well. Swell and downwind call for 90 to 95 cm.
On material, aluminum does the job on a first foil and shrugs off rocks, which makes sense at a rocky spot. Carbon brings more stiffness and less weight, a difference you feel when you pump or ride at high speed.
Go for a carbon mast once you pump cleanly and want more precision. While you're a beginner, aluminum is more than enough. Sort the wing masts in this category by length and material.
Short or long fuselage, large or small stabilizer?
The fuselage links the Front Wing to the stabilizer, and its length sets the character of the foil. A short one makes it lively and responsive in pumping. A long one makes it stable and easy. Beginners should look at a long or medium fuselage within the brand's range.
The stabilizer is the Rear Wing. It controls pitch stability: a large one helps you learn, a small one favors speed and tight turns. Because you can swap it on its own, it works as a fine adjustment as you progress.
Each brand has its own interface, and parts don't cross over from one brand to another. Stay in the same family as your Front Wing and mast. Fuselage and stabilizers each have their own category, with parts from the brands we carry.
Complete foil or separate parts for your wing foil?
For a first wing foil, the complete kit keeps things simple. Everything is made to work together, and the total comes in under the same parts bought one by one. Every brand runs its own system, so a kit saves you from ending up with a part that won't fit.
Once you're up and riding, upgrade one piece at a time: a smaller Front Wing for speed, a reduced stabilizer, a carbon mast for more precision. Each purchase stays in the same brand and the same system, so you never start from zero.
Planes and wingsets are a case apart: Front Wing, fuselage and stabilizer arrive matched. Switch discipline with one and your mast stays put, so there's no need to buy a whole new foil.
What compatibility should you check on a previous model year foil?
The connection between mast, fuselage and wings is specific to each manufacturer. A part from one brand won't fit another brand's foil, and several brands have changed their interface in recent years. So every brand in this category has its own system.
Before buying a single part, note your foil's brand and generation. Everything in the category is new and never used, with model years from 2023 to 2026, so generation is the first thing to check. Send both details to the team at the Pornichet shop and they'll verify the compatibility of each part.
Think about your board too. Most take the mast plate on standard rails, while a few need an adapter. Know that before you order, so your setup doesn't hit a wall.
Can one wing foil cover surf, downwind and pumping?
Yes, it's the same foil. Depending on the discipline, you swap the Front Wing, the stabilizer and the board. With the right parts, your wing foil becomes a surf foil, a downwind foil or a pumping foil.
For downwind, swell calls for a 90 to 95 cm mast and a high aspect ratio Front Wing that glides longer. For pumping, that same aspect ratio helps you pump better. The carbon mast adds the stiffness you feel under load, and a short fuselage keeps the foil responsive.
Downwind and pumping each have their own category: downwind foils on one side, pumping foils on the other.
How do you look after your foil after every session?
Rinse your foil with fresh water after every session at sea. It makes no difference whether you ride a complete foil or one built up piece by piece from Front Wing, mast, fuselage and stabilizer.
Planning to store your foil for a while? Take it apart and let every part dry. Put Tef-Gel on the stainless steel screw set, especially where it meets the aluminum, since corrosion creeps in between those two metals. A disassembled foil has another perk: you can replace a single part and leave the rest alone.
Leading edges hate knocks in transit. Foil bags protect them, and they hold the rest of your gear too. Start these habits on day one, whether the parts are brand new or your foil has been in service for a while.
Wing foil FAQ
What size wing foil should you choose as a beginner?
If you weigh 70 to 85 kg, look at a Front Wing of 1 500 to 1 900 cm², a 75 to 85 cm mast and a long or medium fuselage. This setup lifts off early. It also gives you room for error when your pressure on the foil isn't perfect.
Complete foil or separate parts for a wing foil?
Take a complete kit for your first foil: compatibility is guaranteed. After that, you swap the parts one by one within the same system.
Aluminum or carbon mast for wing foil?
Pick aluminum when you're starting out or riding over rocky bottoms. Move up to carbon once you're pumping and want more precision, because it's stiffer and lighter.
Can you mix brands on a wing foil?
Usually not, as every brand has its own interface. Tell the team which brand and generation your foil is. They'll check compatibility before you order any part.
Is an end-of-series wing foil worth it?
Yes. The gear is brand new and has never been used. The crossed-out price is the catalog price, and the discount comes from end-of-series stock or a model year change. Check your foil's generation before you choose a part.
Why shop DealsEvolution?
DealsEvolution is the clearance site of GlissEvolution, a glisse shop based in Pornichet since 2005. Here you'll mostly find new gear from past seasons, plus a few display, test and second-hand pieces flagged as such on their product page. The crossed-out price is the GlissEvolution catalogue retail price. Split your payment with PayPal or Alma, and pick up your order at the shop for free.
Find Us
GlissEvolution store, 2c avenue du Gulf Stream, 44380 Pornichet (Loire-Atlantique). Phone: 09 62 64 74 77. Open Tuesday to Saturday, 10 am to 1 pm and 3 pm to 7 pm.