Tick an accessory: it goes into the cart with this product.
Low drag for less pumping
A few pumps and you are flying, then you stop pumping and the foil keeps gliding: the F-ONE Jam HM Carbon is made for exactly that. This new front wing with a TITAN 1 connection is available at a reduced price. It lets you keep your TITAN 1 mast in service.
You are starting out in pump foil or already chaining dock starts, up to expert level. You also go wing foiling when the wind is light, or SUP downwind in marginal conditions. Your F-ONE gear is TITAN 1 and you want to keep your mast. You are looking for a foil for sessions when there is almost nothing out there.
Detailed description
Low drag for less pumping
On the F-ONE Jam HM Carbon, the wing design, the incidence and the profile reduce induced drag. In practice, the glide lasts and every re-acceleration takes little effort: a few pulses lift you out of the water, and if you stop pumping for a moment, the wing keeps going. The wingtips have been reworked so that the aspect ratio of 10 does not make it stiff in turns, which keeps it pleasant to ride.
For wing foil and downwind in marginal conditions
The Jam lifts out of the water early, at a decent speed, and handles smoothly and precisely. With its high aspect ratio and its efficiency at low speed, it becomes a real option for wing foil or downwind when conditions are marginal. If you push it, it also accelerates, enough for light wind wing sessions or a few soft waves.
High Modulus Carbon and Monobloc Structure.
The molding uses pre-preg carbon. According to F-ONE, the high-modulus fiber used is 1.5 times stiffer than standard carbon, with a dosage that preserves comfort. The Monobloc principle takes the idea further: front wing and fuselage form a single piece. There is no longer any junction between them, nor the small parasitic movements that steal energy at every pump. Because the fibers run without a break from the fuselage into the wing, the foil gets lighter and its most loaded zone gains stiffness.
A TITAN 1 connection and its M6 screw set
This version uses the first generation of the connection, the TITAN 1, simply called TITAN at F-ONE. It is tightened with its original M6 screw set, namely 3 M6-32 screws and 2 M6-25 screws. For masts, it accepts the F-ONE TITAN 1 models in aluminum or carbon: Mât Alu F-ONE, Mât Carbone 16 and Mât Carbone HM 14. A T2 mast does not fit it, and the brand does not supply any adapter.
Why this price
New item sold at a reduced price. List price 1,089 €, sale price 653 €: you save 436 € (-40%).
A real team behind it
DealsEvolution is run by GlissEvolution, a watersports shop in Pornichet. Same terms of sale, same after-sales service, free pickup at the shop.
Find usChoosing your Jam area
At 1400 cm², the Jam suits pumpers who are already comfortable, wing foiling in light wind, micro-swells in surf foil and first SUP downwinds. The 1600 cm² is a compromise for wing foil and SUP foil when conditions are marginal, and for learning SUP downwind. The 1900 cm² is for dock start, pumping on flat water and the heaviest riders.
Frequently asked questions
Which stabilizer should you fit with the F-ONE Jam HM Carbon?+
F-ONE recommends the Monobloc Tail Pumping XXS 200, whichever area you choose. The stabilizer is not supplied with the wing.
Is the mast supplied with the F-ONE Jam HM Carbon?+
No, you receive the front wing with its EVA bag, the screw set, the Torx key and the user guide. The mast has to be bought separately, with a TITAN 1 connection.
How much does the F-ONE Jam HM Carbon weigh?+
F-ONE states 1.83 kg in 1400, 2.03 kg in 1600 and 2.42 kg in 1900. These weights are for the front wing alone.
Should you choose the Jam in TITAN 1 if your mast is a T2?+
No: a T2 mast and a TITAN 1 wing cannot be assembled. The Jam TITAN 1 makes sense if your gear is already in this connection, so you keep your mast.
More F-one on sale
See all ›F-ONE Jam HM Carbon: the highlights
- Easy dock start: A few pulses are enough to lift out of the water.
- Extended glide: You stop pumping for a few seconds and the foil keeps going.
- Early take-off: Area and aspect ratio get you up early, without needing entry speed.
- Refined wingtips: An aspect ratio of 10 that still turns properly.
- Monobloc HM carbon: Wing and fuselage in a single piece, with no play.
The F-ONE Jam HM Carbon front wing for pumping and wing foiling
F-ONE Jam TITAN 1 specifications
| Brand | F-ONE |
| Model | Jam HM Carbon |
| Type | Foil Front Wing |
| Construction | High-modulus pre-preg carbon, Monobloc |
| Aspect Ratio | 10.2 to 10.5 depending on the area |
| Connection | TITAN 1, M6 screw set |
| Surface areas | 1400, 1600 and 1900 cm² |
| Wingspan | 120 to 140 cm depending on the area |
| Wing weight | 1.83 to 2.42 kg depending on the area |
| Recommended stabilizer | Monobloc Tail Pumping XXS 200 |
| Disciplines | Dock start, pump foil, wing in light wind, SUP downwind |
| Level | Beginner to expert in pump foil. |
| Included | Front wing, EVA bag, screw set, Torx key, user guide |
Frequently asked questions about the F-ONE Jam HM Carbon
Which stabilizer should you fit with the F-ONE Jam HM Carbon?
Is the mast supplied with the F-ONE Jam HM Carbon?
How much does the F-ONE Jam HM Carbon weigh?
Should you choose the Jam in TITAN 1 if your mast is a T2?
Size guide and original specifications: F-ONE Jam HM Carbon on GlissEvolution.
Customer reviews
Loading reviews...