Skip to Content

Surf Pads

Duotone and F-ONE surf pads from previous collections, for your back foot, on a shortboard, a fish or a surfkite board.

Learn more
Duotone Traction Pad D/LAB Front 2026 DUOTONE TRACTION PAD D/LAB FRONT 2026, view 1 -30%

Duotone Traction Pad D/LAB Front 2026

Front pad in 4 mm high density EVA foam, cut out to save weight without losing grip. It fits D/LAB boards for intermediate and advanced strapless riders who want precision.
69.00 € 99.00 € Save 30 €
Duotone Traction Pad SLS Front 2025 DUOTONE Traction Pad SLS Front 2025, view 1 -30% Last few

Duotone Traction Pad SLS Front 2025

4 mm front pad with SLS technology, supplied in 6 pieces you arrange to suit your stance. It's aimed at intermediate and advanced riders in freeride, freestyle or on a directional board.
69.00 € 99.00 € Save 30 €
Duotone Traction Pad Front SLS 2026 DUOTONE TRACTION PAD FRONT SLS 2026, view 1 -30% Last one

Duotone Traction Pad Front SLS 2026

Front traction pad in EVA with a 4 mm profile and a high-performance grip. For intermediate to advanced strapless riders who want to keep the lightness of an SLS board.
69.00 € 99.00 € Save 30 €
Duotone Traction Pad Team Front Traction Pad Team Front - C57 Dark Grey/Blue -30% Last one

Duotone Traction Pad Team Front

Non-slip 8-piece front pad, 3 mm thick, that you place however suits you on the board. For intermediate and advanced riders who want barefoot grip in freestyle, freeride or jumping.
69.00 € 99.00 € Save 30 €
Duotone Traction Pad Front 2026 DUOTONE TRACTION PAD FRONT 2026, view 1 -30%

Duotone Traction Pad Front 2026

Front pad in high density EVA, with Courdoroy cut, lightweight cut-outs and a tail cookie. It is made for intermediate and advanced riders in surf, strapless freestyle and surfoil.
69.00 € 99.00 € Save 30 €
F-ONE Slice Bamboo Pad -46%

F-ONE Slice Bamboo Pad

Set of two pads, front and middle, cut for the F-ONE Slice Bamboo surfboard. It replaces wax for strapless and wave riders of any level.
46.00 € 85.00 € Save 39 €
Ride Engine RE-3 Rear Traction Ride Engine RE-3 Rear Traction, texture micro-points et arche centrale -61%

Ride Engine RE-3 Rear Traction

Pad arrière de surf Ride Engine RE-3 Rear Traction : trois pièces, double zone de grip à micro-points, kick biseauté de 25 mm, arche de 5 mm, adhésif 3M.
19.00 € 49.00 € Save 30 €
Ride Engine RE-2 Rear Traction Ride Engine RE-2 Rear Traction, détail du grip à micro-picots -58%

Ride Engine RE-2 Rear Traction

Pad arrière de surf Ride Engine RE-2 Rear Traction : deux pièces, double zone de grip à micro-picots, kick biseauté de 25 mm, adhésif 3M.
19.00 € 45.00 € Save 26 €

Our selection of Surf pads gives you the grip you need to push through turns without using wax. These last year's models stick to the tail of your board, whether it's a shortboard, a fish, or a surfkite board. This is a great way to get equipped with branded gear. These pads are part of our surf accessories and replace wax in that area.

What is a Surf pad for?

The traction pad sticks to the tail of your board.

The pad is a good choice for surfkite, where you stand for long periods. It prevents rapid wax wear due to friction and falls.

Choosing your Surf pads: one or more pieces?

Rear pads come in several configurations. A three-piece model is very adaptable. You can spread the elements to adjust the pad to the width of your board's tail, for a shortboard or a fish.

A one-piece pad is simpler to install, but you must ensure its width matches your board's.

The role of the kick tail

The kick is the raised rear part of many pads. It is suitable for shortboards and fish-type boards. Its function is to block your foot in turns. By bracing your foot against this stop, you have solid support for your maneuvers.

The front pad, an option to replace wax

The front pad is an alternative to wax for the front foot. It is mainly used in surfkite and wing, disciplines where you stand on the board for a long time. In these conditions, wax tends to wear off quickly.

A front pad ensures durable and consistent grip. It's a comfortable and practical solution for long sessions.

Features of cork pads

Some pad models are made of cork. The main difference from classic EVA foam pads is their thickness. Cork pads are thinner and do not contain plastic foam.

Tips for gluing your surf pads

For a pad to stick well, you need to apply it carefully. Your board's surface must be clean, dry, and degreased with alcohol. This should be done at room temperature. First, position the pad without removing the protective film to check the placement.

Next, remove the adhesive film and apply the pad, pressing firmly. Once glued, you must wait 24 hours before your first session.

Frequently asked questions about surf pads

Pad or wax for a surfkite board?

Since you stand on the board for a long time, wax tends to wear off quickly. Front and rear pads ensure grip that lasts the entire session.

How do I know if a pad will fit my board?

Three-piece pads are easy to adapt because you can adjust the spacing to match your tail's width. For a one-piece pad, simply check that its width is compatible with your board's.

Why buy a surf pad from a previous year?

Buying an end-of-series surf pad is a great way to get branded gear at a reduced price.

Do you have to wait 24 hours before surfing?

Yes, it is important to respect this waiting period.

Our Partner Brands

DealsEvolution
4.9/5
★★★★★
1,204 verified reviews