- Products ...
- Kitesurf
- Kitesurf Bars and Accessories
- Bar accessories
Bar accessories
Chicken loop, release, depower sleeve or handle: end-of-line bar parts from North to bring a bar back to like-new condition without buying a new one.
Learn moreKitesurf bar accessories: the wear parts to swap before you buy a whole new bar
Updated November 2026
The kitesurf bar accessories in this section get a worn bar back in shape, with no need to replace the whole thing. Every part is brand new North Kiteboarding stock from the previous model year, which makes it a smart way to stock up on spares. This section belongs to DealsEvolution's kitesurf bars and accessories range. If the complete bar is what's done, head to the kite bars instead.
Which kitesurf bar accessories deserve a check first?
Three wear parts tire out well before the rest of the bar: the chicken loop with its pin, the quick release and the safety line. All three affect safety, so inspect them first.
Float, handles, stoppers and suicide rings make up the second category. Each one costs little, and you swap it the day it breaks.
A bar with several years of service can go back out with just one new part, as long as you get the right reference. The North Kiteboarding kitesurf bar accessories collected here work that way. Spot the worn part, replace it on its own, and leave the rest of your bar untouched.
When should you replace a chicken loop?
The chicken loop is the part you change most often on a bar, and the cheapest in this section. Session after session, the rubber deforms and the pin slowly flattens.
Cracked rubber, a battered pin, a loop gone slack: any one of these is reason enough to replace it. Don't wait for it to break. A safety part gets changed at the first sign of wear, and the cost is modest next to the job it does.
Pick the exact reference for the model and year of your North Kiteboarding bar. Compatibility is detailed below. Switching to a rope harness? You'll need a matching loop too, which we cover at the end of the page.
What should you do about a sticking quick release?
A quick release in good shape opens under load without any forcing. If it catches, do three things: take it apart, rinse it, replace it. DIY fixes have no place on this part.
Every brand has its own references, and the quick release is no exception. The quick release body depends on the brand, model and model year of your bar. Parts in this section are new and unused, so a worn part gets swapped for one that starts from zero.
Torn between two versions that look alike? Give the model and year of your bar to the GlissEvolution team in Pornichet, and they'll check the reference before you buy.
Why replace the safety line?
Depending on the system, the safety line is a bungee or a rope. Either way it lives outside, exposed to sun and salt. Its elasticity fades gradually, and you can't see it by eye.
A line that looks fine may have lost what makes it useful. It has to work the day everything else in the system has failed. That's why you replace it periodically, without waiting for a visible sign.
Rings, stoppers and handles are different: they're cheap, so you replace them when they break. The line gets renewed preventively, depending on its wear, so your bar stays reliable the day you need it.
How do you find the right reference for your bar?
Each brand works with its own references, and that's where a lot of time gets lost. A part from one brand won't fit another brand's model, and rarely fits a different model from the same brand. In a kitesurf bar accessories section, every part matches a specific system, so checking is essential.
Going by how a part looks, or by an exploded view, is an easy way to get it wrong. The safer route: note the model of your North Kiteboarding bar and its year before you order anything.
Those are the two details the GlissEvolution team in Pornichet asks for to track down the right part. Have them to hand before you order, not after the wrong part turns up.
Can you convert your bar to a rope harness?
Yes, often, and without changing bars. Plenty of riders move to the rope harness in strapless and freestyle alike, for the freedom of rotation it gives. You keep your bar and only change the kit and the loop.
Converting takes a conversion kit and a suitable chicken loop. It all depends on your bar's release system: some accept the setup, others don't. Find out before you buy.
Tell the GlissEvolution team which release system your bar uses, and they'll confirm whether the conversion is possible.
Kitesurf bar accessories: frequently asked questions
When should you replace your kitesurf chicken loop?
As soon as the rubber cracks, the pin is battered or the loop has developed play. It's a safety part, so replace it before it fails.
Are bar parts compatible between brands?
No. Each brand has its own references, and even two models from the same brand rarely share parts. Note the model and year of your bar before you order.
Can you switch your Kite bar to a rope harness?
Often yes, with a conversion kit and a suitable chicken loop. The answer depends on the release system of your bar, so identify it before you order.
Does the safety line on a kite bar need replacing?
Yes, from time to time. It spends its life in sun and salt, and its elasticity drops with no visible sign.
Are end-of-line bar accessories new?
Yes, the parts are new and have never been used. The crossed-out price is the catalogue price, and the drop comes from the model year change.
Why shop DealsEvolution?
DealsEvolution is the clearance site of GlissEvolution, a glisse shop based in Pornichet since 2005. Here you'll find brand-new gear from past seasons, never used, from the same big brands we sell in store. The crossed-out price is the GlissEvolution catalogue retail price. Split your payment with PayPal or Alma, and pick up your order at the shop for free.
Find Us
GlissEvolution store, 2c avenue du Gulf Stream, 44380 Pornichet (Loire-Atlantique). Phone: 09 62 64 74 77. Open Tuesday to Saturday, 10 am to 1 pm and 3 pm to 7 pm.