A stab designed for downwind
Holding your speed from one bump to the next and keeping your heading on long sections: that is the job of the F-One Monobloc Tail DW. This brand new stabilizer is now on sale at DealsEvolution. Monobloc carbon construction, elongated fuselage and sizes from 135 to 210 cm² to match your riding.
It is made for intermediate to expert riders who do downwind and look for performance. If you chain long sections and want a steady trajectory without tiring yourself out, its geometry goes in that direction. Its one-piece carbon construction will speak to those who want a stiff stab.
Detailed description
A stab designed for downwind
F-One designed the Monobloc Tail DW for one precise practice: downwind sessions. Its geometry favors forward drive and heading hold, which makes the glide smoother and less tiring when the sections get longer. The difference is felt quickly when you get going again between two bumps, when you need to keep your speed. The profile and the reduced area go in the same direction, that of speed.
Carbon monobloc: stiffness and crisp transitions
The F-One Monobloc Tail DW is made of a single piece of carbon. This construction gives maximum stiffness and improves the transmission of forces between the fuselage and the stabilizer. On the water, you feel it through crisp transitions and a trajectory that you control with precision, with optimal power transfer.
An elongated fuselage for longitudinal stability
The design of the stab relies on an elongated fuselage and favors stability along the axis. When conditions become sustained, it helps stabilize the whole foil. If you do a lot of downwinds and want to keep a steady heading, this geometry works for you, with a heading hold that limits fatigue over time.
Why this price
New item sold at a reduced price. List price 340 €, sale price 238 €: you save 102 € (-30%).
A real team behind it
DealsEvolution is run by GlissEvolution, a watersports shop in Pornichet. Same terms of sale, same after-sales service, free pickup at the shop.
Find usSize guide
| Model | Surface (cm²) | Wingspan (cm) | Aspect Ratio | Weight (kg) |
|---|---|---|---|---|
| Monobloc Tail DW XS 135 | 135 | 35 | 9.1 | 0.22 |
| Monobloc Tail DW XS 145 | 145 | 35 | 8.4 | 0.22 |
| Monobloc Tail DW XXS 155 | 155 | 37.5 | 9.1 | 0.21 |
| Monobloc Tail DW XXS 170 | 170 | 38.5 | 8.7 | 0.24 |
| Monobloc Tail DW XXXS 190 | 190 | 41 | 8.8 | 0.26 |
| Monobloc Tail DW XXS 210 | 210 | 43 | 8.8 | 0.28 |
Which size of Monobloc Tail DW to choose
Six sizes, from 135 to 210 cm², let you tune lift and responsiveness. The largest, 170, 190 and 210 cm², give more lift and stability: they suit progressing or riding in sustained conditions. The smallest, 135, 145 and 155 cm², bring speed and precision to the advanced rider looking for performance. Also choose according to your foil setup, and check the F-One size guide for the wingspan and the aspect ratio of each size.
Frequently asked questions
Which foil should I use the F-One Monobloc Tail DW with?+
Pair it with a compatible F-One fuselage and Front Wing, this is how the stab keeps the behavior intended in downwind.
How do I maintain the F-One Monobloc Tail DW?+
Rinse it with fresh water after each session to remove salt and sand. Check the condition of the fixings from time to time, and store it in a dry place to extend its life.
What is in the box of the F-One Monobloc Tail DW?+
The stabilizer comes with a protective bag and its screw set. The F-One sheet lists no item as not included for the stab itself.
Is the Monobloc Tail DW reserved for downwind?+
F-One designed it for this practice: forward drive, heading hold and speed between bumps are its priorities. Its program is performance oriented downwind.
You might also like
See all ›More F-one on sale
See all ›Highlights of the F-One Monobloc Tail DW in downwind
- More stable heading: The elongated fuselage helps keep a straight line on downwinds.
- Forward drive: Speed holds better between bumps.
- Carbon stiffness: The monobloc construction transmits power without loss between fuselage and stab.
- Speed oriented: A reduced area and a profile cut to go fast in downwind.



Construction and behavior of the F-One downwind stabilizer
Specifications of the F-One Monobloc Tail DW by size
| Type | Monobloc rear stabilizer |
| Construction | Carbon, single piece |
| Disciplines | Downwind, performance |
| Level | Intermediate to expert |
| F-One size range | 135, 145, 155, 170, 190 and 210 cm² |
| Wingspan | From 35 cm (135 and 145 cm²) to 43 cm (210 cm²) |
| Aspect ratio | From 8.4 to 9.1 depending on the size |
| Weight | From 0.21 to 0.28 kg depending on the size |
Size guide
Included / Not Included
- Included: Stabilizer, protective bag, screws
Questions about the F-One Monobloc Tail DW
Which foil should I use the F-One Monobloc Tail DW with?
How do I maintain the F-One Monobloc Tail DW?
What is in the box of the F-One Monobloc Tail DW?
Is the Monobloc Tail DW reserved for downwind?
Original specifications: F-One Monobloc Tail DW at GlissEvolution.
Customer reviews
Loading reviews...