A front wing and fuselage joint with no visible screw
The Duotone Aero Tail D/LAB 37 bolts straight onto your Aero D/LAB front wing and gives a setup that rides like a 60 cm fuselage. It is a second-hand part, offered at a reduced price, to turn your front wing into a short, manoeuvrable foil.
It is for advanced riders who already ride an Aero D/LAB front wing. In wing, prone or kite, it will suit those who want a lively foil that accelerates hard out of turns and turns tight. The target setup is a short, nervy foil rather than the pursuit of control at high speed.
Detailed description
A front wing and fuselage joint with no visible screw
On the Aero D/LAB system, the rear fuselage is fixed against the front wing. The M6 bolt of this joint is hidden under the mast, so no screw head sticks out into the flow. Once fitted, the Duotone Aero Tail D/LAB 37 becomes one with the front wing: underfoot, you get the feel of a foil that came out of a single carbon mould.
Three bolts for monoblock stiffness
The assembly relies on three bolts: two M8 and one M6. Duotone applies the same logic here as on its Daytona foils, and the unit formed by the front wing and the rear part reaches the stiffness of a one-piece front wing, even though it comes apart in two. On the material side, high-modulus carbon needs no special care, which makes this part easy to live with day to day between sessions.
The 37 cm versus the 43 cm
The D/LAB tail comes in two lengths. Fitted on the front wing, this 37 cm reproduces the behaviour of a 60 cm fuselage: a livelier foil that pops hard and accepts tighter turns. The 43 cm corresponds to a 66 cm fuselage and favours control at high speed. Duotone describes this 37 cm as very manoeuvrable, with an explosive pop.
Why this price
Used item: it has already been ridden, its condition shows in the photos. List price 289 €, sale price 202 €: you save 87 € (-30%).
A real team behind it
DealsEvolution is run by GlissEvolution, a watersports shop in Pornichet. Same terms of sale, same after-sales service, free pickup at the shop.
Find usSize guide
| Length | Construction | Fuselage equivalence | Character (Duotone) |
|---|---|---|---|
| 37 cm | High-modulus carbon | 60 cm | Very agile, explosive pop |
Check the compatibility of your setup
Before ordering, check your gear: this tail only fits on a Duotone Aero D/LAB front wing. On the mast side, it accepts Duotone Aero D/LAB and SLS masts as well as Fanatic carbon masts. Also plan for your stabilizer and your screw set, which are not supplied.
Frequently asked questions
What condition is this second-hand Duotone Aero Tail D/LAB 37 in?+
This tail was used as test gear during the 2025 season. The photos on the listing show the exact part you will receive and its real condition.
37 or 43 cm: which Duotone D/LAB tail should you choose?+
The 37 cm behaves like a 60 cm fuselage, for more liveliness and tighter curves. The 43 cm behaves like a 66 cm fuselage and gives more control when speed rises.
Does the Duotone Aero Tail D/LAB 37 fit on a Fanatic mast?+
Yes, provided you use a Fanatic carbon mast. Duotone Aero D/LAB and SLS masts also work, always with an Aero D/LAB front wing.
Does a high-modulus carbon tail need special care?+
Duotone presents this carbon construction as care-free. It also contributes to the stiffness of the assembly once bolted onto the front wing.
You might also like
See all ›More Duotone on sale
See all ›What the Duotone Aero Tail D/LAB 37 brings to your foil
- Hidden joint: The M6 bolt that fixes the rear part to the front wing sits under the mast, with no visible screw head.
- Rigid assembly: Two M8 bolts and one M6 hold the assembly together, which behaves like a one-piece front wing.
- Lively ride: The 37 cm equals a 60 cm fuselage: explosive pop and tight turns.
- High-modulus carbon: A carbon construction that needs no complicated care.
- Bag included: A protective bag comes with the part, visible in the photos.
Fitting and behaviour of the Duotone Aero Tail D/LAB 37
Specifications of the D/LAB 37 cm tail
| Brand | Duotone |
| Model | Aero Tail D/LAB 37 (2025) |
| Type | Rear fuselage (tail) for Aero D/LAB Front Wing |
| Build | High-modulus carbon |
| Length | 37 cm (equivalent to 60 cm fuselage) |
| Connection | 2 M8 bolts and 1 invisible M6 bolt |
| Compatible Wings | Duotone Aero D/LAB Front Wings |
| Compatible Masts | Duotone Aero D/LAB and SLS, Fanatic carbon masts |
| Disciplines | Wing, prone, kite (advanced level) |
| Condition | Second-hand, ex-2025 test equipment |
| Included | Tail, bag |
| Not included | Front wing, mast, stabilizer, screw set |
Size guide
Included / Not Included
- Included: Aero Tail D/LAB 37 cm, bag
- Not included: Front wing, mast, stabilizer, screw set
Questions about the second-hand Duotone Aero Tail D/LAB 37
What condition is this second-hand Duotone Aero Tail D/LAB 37 in?
37 or 43 cm: which Duotone D/LAB tail should you choose?
Does the Duotone Aero Tail D/LAB 37 fit on a Fanatic mast?
Does a high-modulus carbon tail need special care?
Original specifications: Duotone Aero Tail D/LAB 37 on GlissEvolution.
Customer reviews
Loading reviews...