Tick an accessory: it goes into the cart with this product.
An SES shell between flexibility and support
A shell that supports your lower back but lets your torso rotate: the Ride Engine Saber V3 2024 sits between a soft and a rigid harness. This new XL model is offered at a reduced price. Its memory foam stays comfortable when the session runs long.
You kitesurf or windsurf and find rigid shells too restrictive. The brand has designed it first for riders with a short torso or a flat lower back. You still want real lower back support when the kite or sail pulls.
Detailed description
An SES shell between flexibility and support
Ride Engine took the shape data from its Elite Carbon, the rigid model in the range, and applied it to a more flexible injected shell called SES. The Saber V3 twists more than the Elite Carbon and the Lyte: your back follows torso rotations better while the Lumbar Lock keeps your lower back supported. This flexibility targets riders who feel boxed in by a rigid shell.
The Unity system and its bars
The closure uses Unity Ladder-Lock straps, compatible with the Unity bar range. You can choose a fixed hook bar, the Mega Spreader Bar, a windsurf version, or a rope setup with the Sliding Rope kit from the same family. According to the brand, this compatibility is reserved for the Elite Carbon and the Saber.
Inner comfort and features
Inside, the Fusion Memory Foam is fully wrapped in neoprene. An inner belt stabilizes the harness on your body and hides a pocket for your hook knife. For the leash, the harness has a handle pass-through and a front attachment point.
Why this price
New item sold at a reduced price. List price 339 €, sale price 198 €: you save 141 € (-42%).
A real team behind it
DealsEvolution is run by GlissEvolution, a watersports shop in Pornichet. Same terms of sale, same after-sales service, free pickup at the shop.
Find usSize guide
| Size | Waist size (cm) | Waist size (inches) | Spreader bar (inches) |
|---|---|---|---|
| XS | 61 to 64 | 24 to 25 | 8 |
| S | 66 to 69 | 26 to 27 | 8 |
| S | 71 to 74 | 28 to 29 | 10 |
| S | 76 to 79 | 30 to 31 | 12 |
| M | 81 to 84 | 32 to 33 | 10 |
| M | 86 to 89 | 34 to 35 | 12 |
| L | 91 to 94 | 36 to 37 | 10 |
| L | 96 to 99 | 38 to 39 | 12 |
| XL | 107 to 109 | 42 to 43 | 12 |
| XL | 109 to 112 | 43 to 44 | 14 |
Choosing your size and bar for the Saber V3
Ride Engine measures the waist at navel height. For the XL, the brand pairs a 12-inch bar with waists of 107 to 109 cm, and a 14-inch bar from 109 to 112 cm. The right bar width lets the straps close with a gap of 1.5 to 4.5 inches, ideally 2.5 to 3.5 inches. The brand's size guide, shown below the specifications, completes these guidelines.
Frequently asked questions
Does the Ride Engine Saber V3 2024 come with a bar?+
No, it is sold separately, like the kite leash. The harness accepts Unity hook bars, the Mega Spreader Bar, the windsurf version and the rope kit.
What is the difference between the Saber V3 and the Ride Engine Elite Carbon?+
Both share the same shape data. The Elite Carbon is the rigid shell, while the Saber V3 uses a more flexible SES composite that allows more twist.
Is the Ride Engine Saber V3 2024 suitable for windsurfing?+
Yes, Ride Engine designed it for kitesurfing and windsurfing, and a Unity windsurf bar exists to go with it.
How do I care for the Ride Engine Saber V3 2024?+
Rinse it in fresh water after your session, including the straps and the foam, and let it dry out of the sun before storing. Avoid leaving it in full sun on the sand.
You might also like
See all ›More Ride engine on sale
See all ›Ride Engine Saber V3 2024 highlights
- SES shell: A more flexible injected composite, built on the same shape base as the Elite Carbon.
- Lumbar Lock: Lower back support drawn from the data of many custom harnesses, according to the brand.
- Unity closure: The Ladder-Lock straps adjust precisely and accept Unity bars.
- Fusion Memory Foam: Foam that molds to your back, fully wrapped in neoprene.
- Leash and knife: Handle pass-through, front leash attachment and a knife pocket on the inner belt.



The Ride Engine Saber V3 2024 in detail
Saber V3 harness specifications
| Brand | Ride Engine |
| Model | Saber V3 |
| Year | 2024 |
| Type | Hard-shell waist harness |
| Shell | SES, injected composite, intermediate flex |
| Support | Lumbar Lock |
| Closure | Unity Ladder-Lock straps |
| Comfort | Fusion Memory Foam, neoprene cover |
| Disciplines | Kitesurf, windsurf |
| Size | XL (waist 107 to 112 cm) |
| Colors | Black Magic |
Size guide
Included / Not Included
- Included: Ride Engine Saber V3 2024 harness
- Not included: Unity spreader bar (hook or rope), kite leash
Frequently asked questions about the Ride Engine Saber V3 2024
Does the Ride Engine Saber V3 2024 come with a bar?
What is the difference between the Saber V3 and the Ride Engine Elite Carbon?
Is the Ride Engine Saber V3 2024 suitable for windsurfing?
How do I care for the Ride Engine Saber V3 2024?
Original specifications: Ride Engine Saber V3 2024 on GlissEvolution.
Customer reviews
Loading reviews...