Tick an accessory: it goes into the cart with this product.
A waist harness without a thermoformed shell
When the board bag is stuffed to the brim, the Ride Engine Roam V1 rolls up and still finds room between two boards. You get it new, at a reduced price. With no shell, it holds your lower back through its straps and comes out of the session almost dry.
You fly or drive with your gear and every litre of luggage counts. Or you dislike the feel of a thermoformed shell and want a harness that follows your back. You kitesurf or wingfoil, strapless included, and you want your upper body free to rotate.
Detailed description
A waist harness without a thermoformed shell
A thermoformed shell fixes the shape of the harness and takes up its volume in your luggage, whether you like it or not. On the Roam V1, Ride Engine went without one: all that's left is straps and foam you can roll up and wedge between a wing and a board. On a plane, it's decided at the check-in desk and when you pull on the zip of the bag.
The Cradle Support System replaces the shell
The straps hold your back. Once tightened, the Cradle Support System puts them under tension, the whole thing stiffens and the pressure spreads from one side of your lower back to the other. Ride Engine ties it to its Lumbar Lock, its lower-back support technology. On the water, you don't feel a hard bar across your kidneys, and the harness stays under your ribs when the pull builds.
The Cell Lock foam of the Ride Engine Roam V1
Its closed cells keep water out. After a long session at sea, you come out with an almost dry harness, as light as when you started, and your bag doesn't turn into a sponge when you pack up in the evening. Salt water that doesn't soak in also leaves less salt in the foam.
The Unity Webbing connection
No hook between the bar and the harness: it mounts on the Unity straps. You find the right width at first setup, then the adjustment doesn't move all season. The Roam V1 works with the brand's Unity bars, including the Unity Mega Spreader Bar V1 made for this system.
Why this price
New item sold at a reduced price. List price 235 €, sale price 152 €: you save 83 € (-35%).
A real team behind it
DealsEvolution is run by GlissEvolution, a watersports shop in Pornichet. Same terms of sale, same after-sales service, free pickup at the shop.
Find usSize guide
| XS | 61 to 64 | 24 to 25 | 8-inch |
| S | 66 to 79 | 26 to 31 | 8-inch or 10-inch |
| M | 81 to 89 | 32 to 35 | 10-inch or 12-inch |
| L | 91 to 99 | 36 to 39 | 10-inch or 12-inch |
| XL | 107 to 112 | 42 to 44 | 12-inch or 14-inch |
Size and spreader bar for the Ride Engine Roam V1
Grab a tape measure and go around your belly at navel height: neither your hips nor your jeans size count here. Then compare with the size guide shown under the product description. Right between two sizes, go for the smaller one, because a loose belt ends up sliding up toward your ribs. For the bar, Ride Engine pairs 8 inches with the XS, 8 or 10 with the S, 10 or 12 with the M as with the L, and 12 or 14 with the XL. Once tightened, check how much strap sticks out at the sides: 4 to 11 cm is fine, and 6 to 9 cm is the target setting.
Frequently asked questions
Is the spreader bar included with the Ride Engine Roam V1?+
No, it's sold separately, which lets you choose its width to suit your build. Only Ride Engine Unity bars fit on it. The Unity connection straps come in the package.
Which size of Ride Engine Roam V1 harness should I take?+
Only the belly measurement at the navel counts. If you're between two sizes, the smaller one stays in place better.
How do I care for a Ride Engine Roam V1 harness?+
Rinse it with fresh water as soon as you leave the sea, then dry it in the shade. Even if the foam stays dry, the straps hold salt, which stiffens them over time. Keep it away from the washing machine and direct sun: seams and straps like neither.
Is the Ride Engine Roam V1 suitable for wingfoil?+
Yes, Ride Engine designed it for both disciplines. With no shell, the belt follows your shoulder rotation when you change tack under your wing.
You might also like
See all ›More Ride engine on sale
See all ›Why the Ride Engine Roam V1 travels well
- Foldable: With no rigid shell, it rolls up and wedges into a corner of the bag.
- Spread support: The Cradle Support System spreads the load across the full width of your lower back.
- Non-absorbent foam: Cell Lock doesn't take on water, so the harness doesn't get heavier during a session.
- Single adjustment: The Unity connection is set once to the right width, then you never touch it again.
- Free upper body: Nothing blocks your torso rotation, in strapless kite as in wing.
Soft waist harness with no shell, in detail
Specifications of the Ride Engine waist harness
| Type | Soft waist harness, no rigid shell |
| Support | Cradle Support System, strap tension distributed across the lower back |
| Foam | Cell Lock, non-absorbent |
| Connection | Unity Webbing Connection, set it once and forget it |
| Spreader bar | Ride Engine Unity bars, sold separately |
| Included | Harness and Unity connection straps |
| Range sizes | XS, S, M, L, XL |
| Disciplines | Kitesurf, wingfoil |
Size guide
Included / Not Included
- Included: Ride Engine Roam V1 harness, Unity connection straps
- Not included: Spreader bar, waist leash
Questions about the Ride Engine Roam V1 harness
Is the spreader bar included with the Ride Engine Roam V1?
Which size of Ride Engine Roam V1 harness should I take?
How do I care for a Ride Engine Roam V1 harness?
Is the Ride Engine Roam V1 suitable for wingfoil?
Original specifications: Ride Engine Roam V1 on GlissEvolution.
Customer reviews
Loading reviews...