A Curv shell to relieve your lower back
The Ride Engine Point Seat V1 supports your lower back with a rigid Curv shell, and its compact cut leaves your legs free. New and at a reduced price on DealsEvolution, it comes with its TRAD bar.
It is aimed at intermediate to advanced kitesurfers looking for a seat harness that balances support and comfort. On long freeride sessions, the pressure spread across your pelvis and lower back limits fatigue. In big air, the shell keeps your posture stable when the kite loads up. The range runs from S to XL, for waist sizes from 71 to 114 cm.
Detailed description
A Curv shell to relieve your lower back
The back of the Ride Engine Point Seat V1 rests on a rigid Curv composite shell. It targets the lower back and steadies your posture, which delays muscle fatigue as the reaches follow one another. With a steadier position, you also handle the power of the kite better instead of just enduring it, whether you are pulling a long freeride reach or loading up before a jump.
A compact cut inspired by climbing
Ride Engine designed this seat harness with climbing harnesses in mind. The result is a compact cut that hugs the body and does not restrict movement. For pops and spins, you keep your freedom, and the harness stays in close contact with your body.
Neoprene leg straps and adjustments
The leg straps are made of neoprene, with an ergonomic cut, and are adjustable. You set their tension for a fit that matches your build, and the harness disappears even after several hours on the water.
TRAD bar and built-in accessories
The Point Seat V1 comes equipped with a TRAD bar with a stainless steel 8 mm hook, stabilizing fins and an ergonomic pad to spread the pressure. On the harness, an attachment point takes your leash, and a dedicated pocket holds your line cutter so it is always within reach.
Why this price
New item sold at a reduced price. List price 369 €, sale price 313 €: you save 56 € (-15%).
A real team behind it
DealsEvolution is run by GlissEvolution, a watersports shop in Pornichet. Same terms of sale, same after-sales service, free pickup at the shop.
Find usSize guide
| Size | Waist size (cm) | Spreader Bar (cm) |
|---|---|---|
| S | 71 - 79 | 20 |
| M | 81 - 89 | 25 |
| L | 91 - 99 | 25 |
| XL | 102 - 114 | 25 |
Choosing your seat harness size
Choose your size by waist measurement, taken at navel level. The S covers 71 to 79 cm, the M 81 to 89 cm, the L 91 to 99 cm and the XL 102 to 114 cm. The supplied bar measures 20 cm in S and 25 cm from the M up. The size guide on the page lists these figures.
Frequently asked questions
Which size of Ride Engine Point Seat V1 should you choose?+
Measure your waist at the navel and check the chart: S from 71 to 79 cm, M from 81 to 89 cm, L from 91 to 99 cm, XL from 102 to 114 cm.
How do you care for a Ride Engine Point Seat harness?+
Rinse it with fresh water after every session to flush out salt and sand, then let it dry in the shade, away from prolonged sun exposure. Regularly check the stainless steel hook, the seams and the neoprene.
Is the Point Seat V1 compatible with my kite bar?+
It works with your usual bar and kite, since it comes with a TRAD bar and a stainless steel 8 mm hook. If your gear is unusual, check that your line is compatible with the spreader bar.
Is the Ride Engine Point Seat Harness V1 new?+
Yes, it is new. It comes with its TRAD bar, its fins and its pad, but without a kite bar, leash or pump.
You might also like
See all ›More Ride engine on sale
See all ›Highlights of the Ride Engine Point Seat V1
- Rigid Curv shell: Firm support for your lower back, so you tire less on the water.
- Climbing-style geometry: A compact cut that gets in the way of neither pops nor spins.
- Adjustable leg straps: Made of neoprene, they adjust to your build.
- TRAD bar included: Stainless steel 8 mm hook, stabilizing fins and ergonomic pad.
- Handy attachments: A leash attachment point and a pocket for the line cutter.




The Ride Engine Point Seat V1 seat harness in detail
Specifications of the Ride Engine Point Seat Harness V1
| Type | Kitesurf seat harness |
| Build | Rigid Curv composite shell |
| Geometry | Compact, inspired by climbing harnesses |
| Leg Straps | Adjustable neoprene, ergonomic cut |
| Bar included | TRAD bar, stainless steel 8 mm hook, stabilizing fins |
| Pad | Ergonomic pad included |
| Attachments | Leash attachment, line cutter pocket |
| Disciplines | Freeride, big air, long sessions |
| Rider level | Intermediate to advanced |
| Range sizes | S, M, L, XL |
Size guide
Included / Not Included
- Included: TRAD bar with stainless steel 8 mm hook, stabilizing fins and ergonomic pad
- Not included: other gear (kite bar, leash, pump)
Frequently asked questions about the Ride Engine Point Seat V1
Which size of Ride Engine Point Seat V1 should you choose?
How do you care for a Ride Engine Point Seat harness?
Is the Point Seat V1 compatible with my kite bar?
Is the Ride Engine Point Seat Harness V1 new?
Original specifications: Ride Engine Point Seat V1 on GlissEvolution.
Customer reviews
Loading reviews...