With its 950 cm², the Duotone Carve 3.0 D/LAB 950 adds area to a lively, precise carving wing. It comes as a second-hand pack with the PX 175 stab, two pieces from the 2025 test fleet sold at a reduced price. You gain pumping compared with the previous Carve, without giving up any hold at high speed.
The pack is aimed at wave riders who like to lean into their turns and switch rails quickly. The 950 cm² is one of the larger sizes in the Carve 3.0 D/LAB line, just below the 1100. Take it out for prone, surf foil, kite foil or freestyle. Gear-wise, you need a D/LAB tail and a 3BS mast.
Strengths of the Duotone Carve 3.0 D/LAB 950
- More pumping: Here, as in glide, the 3.0 generation outperforms the Carve 2.0 D/LAB: speed builds fast and lasts.
- Smooth rail to rail: Quick to react in waves, it links tight turns without a jolt.
- Pitch control: Greater stability on this axis, so you stay in control at high speed.
- Some pop: Aerial freestyle tricks become more accessible.
- D/LAB construction: A light, very strong high-modulus carbon, and recessed screws that disturb the flow less.
The Duotone Carve 3.0 D/LAB 950 in action
A wave wing that pumps better
For this third D/LAB version, Duotone worked on pumping and glide, both clearly improved over the Carve 2.0 D/LAB. On the water, that means sharper re-acceleration and speed that holds. In waves, the wing reacts instantly, bites with power and switches from one rail to the other without a jerk, which helps you link tight turns. More stable in pitch, it stays controllable when things get fast.
The numbers behind the Duotone Carve 3.0 D/LAB 950
At 950 cm², the wingspan reaches 81 cm and the aspect ratio is 6.9. Each size in the range, from 500 to 1100 cm², gets its own profiles and cambers. The high-modulus carbon lightens the structure, which stays very strong, and the screws sunk into the wing cut drag compared with the old SLS concept.
The recommended PX 175 stab
For the 950, Duotone pairs the PX 175. This stab is derived from the P and only changes the twist of the profile: handling, pumping and pitch control all benefit. It replaces the P 180, with a slightly smaller area.
Specifications of the Carve 950 and the PX 175
| Brand | Duotone |
| Pack contents | Carve 3.0 D/LAB 950 (front wing) and PX 175 (stab), 2025 |
| Lamination | High modulus D/LAB carbon |
| Area | 950 cm² |
| Wingspan | 81 cm |
| Aspect ratio | 6.9 |
| Connection | 3BS mast (3 M8 x 50 screws at 15 Nm) via D/LAB tail (M6 x 25 screw at 10 Nm) |
| Stab | PX 175 |
| Stab torque | M6 x 16 (2 screws) at 10 Nm |
| Disciplines | Kite foil, surf, prone, freestyle |
| Condition | Ex-2025 test gear, second-hand |
Size guide
| Part | Surface (cm²) | Wingspan (cm) | Aspect ratio |
|---|---|---|---|
| Carve 3.0 D/LAB Wing | 950 | 81 | 6.9 |
| PX Stabilizer | 175 | Not communicated. | Not communicated. |
Included / Not Included
- Included: Carve 3.0 D/LAB 950 front wing and its bag, PX 175 stabilizer and its bag
- Not included: mast, D/LAB tail, screw set, board
Mounting the Carve 950 on a D/LAB tail and 3BS mast
The wing attaches to a D/LAB tail, available in two lengths from Duotone, then to any mast with a 3BS connection. Tighten the tail's M6 x 25 screw to 10 Nm, the mast's 3 M8 x 50 screws to 15 Nm and the stab's 2 M6 x 16 screws to 10 Nm. Only the wing and the stab are supplied, each with its bag; the screw set, mast, tail and board are not part of the pack.
FAQ on the Carve 3.0 D/LAB 950 and its stab
What condition is this second-hand Carve 3.0 D/LAB 950 in?
This pair was used as test equipment during 2025. Check the photos: they show the wing and stab you'll receive, as they are today.
Is the PX 175 the right stab for the Carve 3.0 D/LAB 950?
Yes, Duotone recommends it for this size, and the whole PX series was designed to go with the Carve 3.0. Up to the 800, the brand suggests the PX 160 instead.
Which Carve 3.0 D/LAB size should you choose?
The range has five sizes, from 500 to 1100 cm², with the 650, 800 and 950 in between. The 950 is one of the larger ones; to decide, use the Duotone size guide.
Can you use the Carve 3.0 D/LAB 950 for kite foil?
Yes, Duotone lists kite foil among its disciplines, alongside surf, prone and freestyle. Mounting uses the same D/LAB tail and the same 3BS mast.
Original specifications: Duotone Carve 3.0 D/LAB 950 on GlissEvolution.