The Duotone Glide 2.0 D/LAB 750 is on sale in a second-hand pack, with the stabilizer Duotone pairs it with. Both parts were used as test gear. On the water, it delivers lift that gets you up early and clean efficiency when pumping.
The pack suits a demanding foiler, comfortable pumping and gliding, who wants a fast front wing. It appeals to riders heading out downwind, prone or behind a wing who want to fly from the very first bumps. Between the 620 and the 900, the 750 sits in the middle of the range. It assumes you already have Duotone gear for the mast and tail.
What the Duotone Glide 2.0 D/LAB 750 brings to your foil
- Early take-offs: The 750 lifts like the next size up of the previous Glide, which helps you get up without forcing it.
- Efficient pumping: A fast, low-drag shape that feels at home whether you are pumping back up or gliding.
- 10.3 ratio: An aspect ratio that gains in glide and pumping over the previous version.
- Smooth carves: The slimmer wingtips make linked turns easier and stay neutral when they breach the surface.
- Matched duo: The H 165 is the stab Duotone recommends for this area.
Profile, construction and stab of the Glide 2.0 D/LAB 750
A new-generation Glide in D/LAB
This Glide 2.0 continues the Glide line in its D/LAB version, the top of the Duotone range. The profile combines speed and reduced drag, with strong performance in pumping and glide. Its strength lies in lift: each size flies like the next size up of the previous Glide. As a result, you get up earlier and the wing holds on at low speed instead of stalling.
Dimensions of the Duotone Glide 2.0 D/LAB 750
The 750 cm² has an 88 cm wingspan and an aspect ratio of 10.3. Its chord stays wide in the center to keep lift, then narrows towards the tips. This outline makes linked turns easier, and the wing stays neutral when a tip breaches the surface.
A Semi-Glider carbon layup
Duotone builds this wing in D/LAB Semi-Glider, a layup that mixes high-modulus and intermediate-modulus carbon. The stated goal is twofold: less weight and less drag. On a wing built for pumping and glide, you feel that gain every time you pump back up.
The H 165 stab in the pack
The H 165 supplied measures 165 cm² with a 37 cm wingspan and an aspect ratio of 8.4. The H range improves pumping response, glide and drag. If you want a different character, the wing also takes S stabs, for waves, and P stabs, for speed.
Measurements and fittings of the 750 wing and the H 165
| Brand | Duotone |
| Composition | Glide 2.0 D/LAB 750 front wing and H 165 stab, 2025 season |
| Lamination | Semi-Glider D/LAB, high-modulus carbon combined with intermediate-modulus carbon |
| Wing area | 750 cm² |
| Wingspan of the wing | 88 cm |
| Wing aspect ratio | 10.3 |
| Wing mounting | D/LAB tail (M6 x 25 screw, 10 Nm) on 3BS mast (3 M8 x 50 screws, 15 Nm) |
| Stab | H 165, 37 cm wingspan, aspect ratio 8.4 |
| Stab screws | 2 M6 x 16 screws at 10 Nm |
| Disciplines | Pumping, downwind, prone, wing |
| Condition | Second-hand, ex-2025 test equipment |
Size guide
| Part | Surface (cm²) | Wingspan (cm) | Aspect ratio |
|---|---|---|---|
| Glide 2.0 D/LAB Front Wing | 750 | 88 | 10.3 |
| H Stabilizer | 165 | 37 | 8.4 |
Included / Not Included
- Included: Glide 2.0 D/LAB 750 front wing and its bag, H 165 stabilizer and its bag
- Not included: Mast, D/LAB tail, Screw set, Board
Screw set and assembly of the Glide 2.0 D/LAB pack
To assemble everything, you need a D/LAB tail fixed to the wing with an M6 x 25 screw at 10 Nm and a 3BS mast held by 3 M8 x 50 screws at 15 Nm. The stab is tightened with 2 M6 x 16 screws at 10 Nm. No screws are supplied, and neither are the mast, the tail or the board: you get the wing and the stab, each in its own bag.
Your questions about the Duotone Glide 2.0 D/LAB 750
What condition is the second-hand Duotone Glide 2.0 D/LAB 750 in?
The wing and the stab were used for testing during the 2025 season. The photos on the product page show the exact parts you receive and their actual condition.
Is the H 165 stab right for the Glide 2.0 D/LAB 750?
Yes, Duotone recommends it for this area. The H range is also the one the brand's downwind team chooses.
Which Glide 2.0 D/LAB size should you pick?
The Glide 2.0 D/LAB comes in 620, 750 and 900 cm², with the H 145, H 165 and H 185 stabs recommended. Keep in mind that each area lifts like the next size up of the previous Glide, and check your choice in the Duotone size guide.
Does the Duotone Glide 2.0 D/LAB 750 work for wing foil?
Yes, wing riding is part of its program, just like pumping, prone and downwind. In terms of lift, it helps you get up early behind your handheld wing.
Original specifications: Duotone Glide 2.0 D/LAB 750 on GlissEvolution.