The Duotone Glide 2.0 D/LAB 620 pack brings together a 620 cm² carbon front wing and its H 145 stabilizer, two second-hand parts sold together at a reduced price. The wing takes off early and, once flying, keeps drag low, both when pumping and gliding.
This pack is for the demanding foil rider who wants a front wing with plenty of lift and speed, efficient when pumping as well as gliding. It speaks to riders who want to get up early and stay flying when speed drops. You need to enjoy turning non-stop: the refined wingtips make carves easier. It is also a way into D/LAB construction, the high-end version of the Glide.
Highlights of the Duotone Glide 2.0 D/LAB 620
- Low drag: The shape of the Glide 2.0 D/LAB targets speed and efficiency, both when pumping and gliding.
- Early take-off: It lifts as much as the next size up in the previous Glide, so you get up early without stalling when things slow down.
- Aspect ratio 10.3: This ratio gives more glide and improved pumping compared to the previous generation of the Glide.
- Semi-Glider carbon: The D/LAB layup mixes high-modulus and intermediate-modulus carbon to save weight and cut drag.
- Matching H stab: The H 145 is the stabilizer Duotone pairs with this area, with better pumping response.
How the Glide 2.0 D/LAB and H 145 pack behaves
Lift and speed of the Glide 2.0 D/LAB
The Glide 2.0 D/LAB is the new generation of the Glide, built in high-end D/LAB construction. Its profile seeks the right balance between speed, reduced drag and pumping efficiency. For the same area, it lifts like the next size up of the previous Glide: you get up earlier, and the wing does not stall when speed drops.
The outline of the Duotone Glide 2.0 D/LAB 620
At 620 cm², the wing has an 80 cm wingspan and an aspect ratio of 10.3, which gives it more glide and better pumping than the previous version. The center keeps a wide chord, a source of lift. The tips stay neutral when a wingtip breaches the surface, a detail that matters in repeated tight turns. On the material side, the Semi-Glider layup combines high-modulus and intermediate-modulus carbon, for less weight and less drag.
The matching H 145 stabilizer
To go with the 620, Duotone recommends the H 145. This 145 cm² stab has a 35 cm wingspan and an aspect ratio of 8.4. The H family gives better pumping response, makes glide more efficient and cuts drag. It is also the model the brand's downwind team prefers to ride.
Specifications of the 620 wing and the H 145 stab
| Brand | Duotone |
| Pack contents | Glide 2.0 D/LAB 620 front wing and H 145 stabilizer (2025) |
| Build | Semi-Glider D/LAB in high-modulus and intermediate-modulus carbon |
| Wing area | 620 cm² |
| Wingspan of the wing | 80 cm |
| Wing aspect ratio | 10.3 |
| Wing mounting | D/LAB tail (M6 x 25 screw, 10 Nm), 3BS mast (3 M8 x 50 screws, 15 Nm) |
| Stabilizer | H 145: 145 cm², 35 cm wingspan, aspect ratio 8.4 |
| Stab mounting | 2 M6 x 16 screws, 10 Nm |
| Disciplines | Pumping, downwind, prone, wing |
| Condition | Second-hand, ex-2025 test equipment |
Size guide
| Part | Surface (cm²) | Wingspan (cm) | Aspect ratio |
|---|---|---|---|
| Glide 2.0 D/LAB Front Wing | 620 | 80 | 10.3 |
| H Stabilizer | 145 | 35 | 8.4 |
Included / Not Included
- Included: Glide 2.0 D/LAB 620 front wing and its bag, H 145 stabilizer and its bag
- Not included: Mast, D/LAB tail, Screw set, Board
Mounting the wing and stab on your foil
The wing screws onto a D/LAB tail with an M6 x 25 screw tightened to 10 Nm, and the assembly joins a 3BS mast with 3 M8 x 50 screws at 15 Nm. The stab is held by 2 M6 x 16 screws, also at 10 Nm. Bring your own screw set as well as the mast, the D/LAB tail and the board: the pack is limited to the wing and the stab, each in its own bag.
Questions about the Duotone Glide 2.0 D/LAB 620
What condition is the second-hand Duotone Glide 2.0 D/LAB 620 + H 145 pack in?
Both parts were used as test gear during the 2025 season. The photos on the product page show the wing and stab actually sold, in their actual condition.
Which other stabilizers fit the Glide 2.0 D/LAB 620?
On top of the H 145 supplied, the wing takes Duotone's S stabilizers, geared towards waves, and P stabilizers, geared towards speed. So you can adapt the setup to your riding.
Which size of Duotone Glide 2.0 D/LAB should you choose?
The range has three areas: 620, 750 and 900 cm², with the H 145, H 165 and H 185 stabs recommended. The 620 is the most compact, and each size lifts as much as the next size up of the previous Glide. To decide based on your build, check the Duotone size guide.
Which disciplines is the Duotone Glide 2.0 D/LAB 620 for?
Duotone designs it for pumping, downwind, prone and wing. Pumping remains its favorite playground, with a low-drag shape.
Original specifications: Duotone Glide 2.0 D/LAB 620 on GlissEvolution.