Built for waves, the Duotone Carve 3.0 D/LAB 650 and its PX 160 stab come from the 2025 test fleet and go on sale in a second-hand pack. The wing carves precisely, links tight turns and stays in control as speed builds.
This pack is for riders who like loaded carves and quick transitions in waves. It covers prone, surf foil, kite foil and freestyle, where its pop helps with aerial moves. At 650 cm², the wing sits at the lower end of the Carve 3.0 D/LAB range. It needs a D/LAB tail and a mast with a 3BS connection.
Highlights of the Duotone Carve 3.0 D/LAB 650
- Boosted pumping: Compared with the Carve 2.0 D/LAB, this generation pumps and glides better, so you pick up speed and keep it.
- Precise carving: Lively in waves, it flips from rail to rail without a jolt and links tight turns.
- Controlled pitch: At high speed, the wing moves less in pitch and stays under control.
- Pop for freestyle: The wing's pop makes aerial tricks easier.
- Recessed screws: Less drag than with the old SLS concept, where the screws stayed exposed.
The Duotone Carve 3.0 D/LAB 650 on the water
What the Carve 3.0 D/LAB changes in waves
The Carve 3.0 D/LAB improves pumping and glide over the Carve 2.0 D/LAB: it accelerates more easily and holds a sustained speed. In the wave, it responds quickly, carves with precision and power, and moves smoothly from one rail to the other to link tight turns. When things get fast, it stays calm on the pitch axis, and its pop comes in handy for freestyle.
Dimensions of the Duotone Carve 3.0 D/LAB 650
At 650 cm², the wing has a 68 cm wingspan and an aspect ratio of 7.2. Duotone adjusts profiles and cambers for each size in the range, which runs from 500 to 1100 cm². The high-modulus carbon layup makes the wing lighter without giving up any strength, and the screws sunk into the structure cut drag.
The PX 160 stab, a cousin of the P
Duotone pairs the PX 160 with the Carve 3.0 D/LAB 650. Compared with the P stab, only the twist of the profile differs: you gain handling, pumping and pitch control. The PX 160 replaces the P 165, with a slightly smaller area.
Specifications of the Carve 650 and the PX 160 stab
| Brand | Duotone |
| Pack | Carve 3.0 D/LAB 650 front wing and PX 160 stabilizer, 2025 |
| Build | D/LAB, high modulus carbon |
| Wing area | 650 cm² |
| Wingspan | 68 cm |
| Aspect ratio | 7.2 |
| Wing mounting | D/LAB tail (M6 x 25 screw, 10 Nm), 3BS mast (3 M8 x 50 screws, 15 Nm) |
| Stabilizer | PX 160 |
| Stabilizer attachment | 2 M6 x 16 screws, 10 Nm |
| Disciplines | Freestyle, prone, surf, kite foil |
| Condition | Second-hand, ex-2025 test equipment |
Size guide
| Part | Surface (cm²) | Wingspan (cm) | Aspect ratio |
|---|---|---|---|
| Carve 3.0 D/LAB Wing | 650 | 68 | 7.2 |
| PX Stabilizer | 160 | Not communicated. | Not communicated. |
Included / Not Included
- Included: Carve 3.0 D/LAB 650 front wing and its bag, PX 160 stabilizer and its bag
- Not included: mast, D/LAB tail, screw set, board
Mounting the Carve 3.0 D/LAB and its stab
The wing mounts on a D/LAB tail, which Duotone offers in two lengths, then on any mast with a 3BS connection. Allow one M6 x 25 screw at 10 Nm on the tail side and 3 M8 x 50 screws at 15 Nm on the mast side, then 2 M6 x 16 screws at 10 Nm for the stab. The pack contains only the wing and the stab in their bags: screw set, mast, tail and board have to be sourced separately.
Questions about the Carve 3.0 D/LAB 650 and PX 160 pack
What condition is the second-hand Duotone Carve 3.0 D/LAB 650 in?
The wing and the stab were used as test gear during the 2025 season. The photos on this page show the exact pieces for sale and their actual condition.
Is the PX 160 stab made for the Carve 3.0 D/LAB 650?
Yes, it's the stab Duotone recommends for this size, and the PX range is designed to go with the Carve 3.0. It replaces the P 165.
Which Duotone Carve 3.0 D/LAB size should I choose?
The range has five sizes: 500, 650, 800, 950 and 1100 cm². The 650 pairs with the PX 160; for the rest, the Duotone size guide helps you choose based on your build and your discipline.
Is the Carve 3.0 D/LAB 650 suited to kite foil?
Yes, kite foil is part of its program along with freestyle, prone and surf. For this discipline, the 500 to 1100 cm² spread leaves you a choice of area.
Original specifications: Duotone Carve 3.0 D/LAB 650 on GlissEvolution.