Two neoprenes for different body zones
Run after run on your kite or windsurf board, the O'Neill Hyperfreak Wind 3/2+ CZ makes you forget you are wearing neoprene: light and very stretchy in the shoulders, it drains the water that builds up in the legs. Brand new, it is now on sale at DealsEvolution.
You kitesurf or windsurf and your sessions stretch out: the lightened neoprene limits fatigue over time. You sheet in often, you link maneuvers, and you want free shoulders. The size guide covers builds from M to XXL, with an MT for tall riders. Beginner or advanced, the wetsuit follows the same program.
Detailed description
Two neoprenes for different body zones
O'Neill splits the work between two materials. On the torso and legs, TechnoButter 3 reduces the weight of the wetsuit and the water it holds: on a long session, fatigue arrives later. On the arms and shoulders, TechnoButter 3X, lined inside and out, keeps the warmth without stiffening the area that works hardest when you sheet in or throw a maneuver.
Draining the legs after a fall
After a fall, water rushes in and stays trapped in the bottom of the wetsuit. The Covert Drainage System solves this with perforated hems at the ankles, combined with straps. A 360° barrier with drainage holes completes the setup. The result on the water: less dead weight in the legs and a faster return to warmth after a dunking.
Seams and reinforcements against wear
The GBS seams are glued, then blind-stitched, which limits water getting in without stiffening the material. On top, the TB3X taping reinforces the seams and reduces friction points, so there is less irritation over a long session. The wetsuit thus keeps its behavior over time.
A cleaner lamination
The neoprene is assembled with a solvent-free Aqua Alpha lamination, chosen by O'Neill to reduce the environmental impact of manufacturing. The finish stays careful, right down to the adjustable ankle straps.
Why this price
New item sold at a reduced price. List price 359.95 €, sale price 269 €: you save 90.95 € (-25%).
A real team behind it
DealsEvolution is run by GlissEvolution, a watersports shop in Pornichet. Same terms of sale, same after-sales service, free pickup at the shop.
Find usSize guide
| Size | Height (cm) | Weight (kg) | Chest (cm) | Waist size (cm) |
|---|---|---|---|---|
| M | 175-180 | 70-77 | 99-104 | 79-84 |
| MT | 185-191 | 73-82 | 99-104 | 79-84 |
| L | 178-183 | 77-86 | 104-110 | 84-89 |
| XL | 180-185 | 86-95 | 110-117 | 89-94 |
| XXL | 183-188 | 95-104 | 117-123 | 94-99 |
Videos
Choosing the size of your Hyperfreak Wind wetsuit
For size, cross-check your height, your weight and your chest and waist measurements with the O'Neill guide shown below the listing: all four measurements count, not just height. Once the wetsuit is on, adjust the ankle straps to close the bottom of the legs to your build.
Frequently asked questions
Which size of O'Neill Hyperfreak Wind 3/2+ CZ should I choose?+
The M targets a height of 175 to 180 cm, the XXL goes up to 188 cm. For tall, slim builds, the MT covers 185 to 191 cm with the same measurements as the M.
Is the Hyperfreak Wind 3/2+ CZ suitable for kitesurf and windsurf?+
Yes, O'Neill built it for wind sports. The flexibility of the arms and shoulders helps when you sheet in and when you maneuver, on a technical session as on a long outing.
What should I wear with an O'Neill Hyperfreak Wind 3/2+ CZ wetsuit?+
Depending on water temperature, add boots, gloves or a hood. It's worn with your usual harness and board.
How do you maintain an O'Neill Hyperfreak Wind 3/2+ CZ wetsuit?+
Rinse it with fresh water after every session and let it dry in the shade, away from prolonged direct sun. Store it flat or on a wide hanger. No machine washing or harsh products.
You might also like
See all ›More O’neill on sale
See all ›What the O'Neill Hyperfreak Wind 3/2+ CZ offers
- Lightened neoprene: The TechnoButter 3 on the torso and legs weighs less and absorbs less water, so you tire less at the end of a session.
- Free shoulders: The TB3X panels on the arms and shoulders stay very supple for sheeting in and maneuvering.
- Legs that drain: The Covert Drainage System at the ankles and the perforated hems let out the water that builds up after a fall.
- Taped seams: The GBS seams, glued and blind-stitched and backed with TB3X taping, slow water getting in.
- Adjustable ankles: Adjustable straps tighten the bottom of the legs.




Materials and construction of the O'Neill Hyperfreak Wind 3/2+ CZ
Specifications for the Hyperfreak Wind 3/2 wetsuit
| Type | Men's 3/2 neoprene wetsuit |
| Disciplines | Kitesurf, windsurf, technical and long sessions |
| Rider level | Ideal for beginner to advanced riders. |
| Body and legs | TechnoButter 3 |
| Arms and shoulders | TechnoButter 3X, inner and outer lining |
| Seams | GBS (Glued and Blind Stitched) |
| Reinforcements | TB3X taping |
| Drainage | Covert Drainage System, perforated hems at the ankles |
| Watertightness | 360° barrier with drainage holes |
| Lamination | Solvent-free Aqua Alpha |
| Adjustment | Adjustable ankle straps |
| Sizes | M, MT, L, XL, XXL |
| Colors | One colorway |
Size guide
Videos
Included / Not Included
- Included: Fullsuit
Questions about the O'Neill Hyperfreak Wind 3/2+ CZ wetsuit
Which size of O'Neill Hyperfreak Wind 3/2+ CZ should I choose?
Is the Hyperfreak Wind 3/2+ CZ suitable for kitesurf and windsurf?
What should I wear with an O'Neill Hyperfreak Wind 3/2+ CZ wetsuit?
How do you maintain an O'Neill Hyperfreak Wind 3/2+ CZ wetsuit?
Original specifications: O'Neill Hyperfreak Wind 3/2+ CZ on GlissEvolution.
Customer reviews
Loading reviews...