Tick an accessory: it goes into the cart with this product.
The Tail Pumping XXS 200 stabilizer
The F-One Plane Jam HM Carbon brings together the Monobloc front wing and the stabilizer the brand pairs with this range, ready to mount on a Titan 1 mast. It is on sale at a reduced price on DealsEvolution, brand new. A few pumps lift you out of the water, and the wing keeps gliding even after you stop pumping.
It is aimed at riders who do dock start or pump foil, from a first try to expert level. Wingfoilers who want to stay up on the foil in light wind will find it useful too, as will SUP downwind riders in marginal conditions. You need to already own an F-One Titan 1 mast, or plan to buy one.
Detailed description
The Tail Pumping XXS 200 stabilizer
For the whole Jam range, F-One recommends the Tail Pumping XXS 200 stabilizer, and it is the one supplied with the front wing in this plane. It adds lift at the end of each pump and stretches the glide between two pumps. With the F-One Plane Jam HM Carbon, you don't have to work out which stabilizer to pair with your wing: the pairing is the one the brand chose.
Low drag, plenty of glide
The Jam's design, with its incidence and profile section, limits induced drag. In practice, it restarts with little effort and the glide holds long after the last pump. The wingtips have been refined to stay manoeuvrable despite an aspect ratio of around 10. It is therefore pleasant to ride, beyond its role as a pumping machine. F-One's gauges rate it at the maximum for dock start and pumping, much lower for carving and roll.
In wing and downwind when the wind is missing
Take-off comes early, speed stays decent and the ride is smooth and precise. With its high aspect ratio and its efficiency at low speed, the Jam holds up in wing foil and downwind in marginal conditions. If you push it, it can also accelerate, which opens up light-wind wing sessions and a few featureless waves. When the water offers almost nothing, this is the one to pull out of the bag.
Prepreg HM carbon and Monobloc wing
F-One moulds the Jam in prepreg high-modulus carbon, rated 1.5 times stiffer than a standard fibre, with a layup that preserves comfort. Front wing and fuselage are one piece: no more joint, so no more micro-movements wasting the energy of each pump. Because the fibres run unbroken from the fuselage into the wing, weight drops and the most loaded area of the foil gains stiffness.
Why this price
New item sold at a reduced price. List price 1,429 €, sale price 857 €: you save 572 € (-40%).
A real team behind it
DealsEvolution is run by GlissEvolution, a watersports shop in Pornichet. Same terms of sale, same after-sales service, free pickup at the shop.
Find usChoosing between the Jam 1400, 1600 and 1900
The 1400 cm² suits experienced pumpers, first SUP downwinds, wing when the wind is soft and very small swells on a surf foil. The 1600 cm² is the compromise for wing foil and SUP foil in marginal conditions, and it supports learning SUP downwind well. The 1900 cm² takes over for dock start and pumping on flat water, as well as for the heaviest riders.
Frequently asked questions
Does the F-One Plane Jam HM Carbon Titan 1 fit a Titan 2 mast?+
No. This plane uses the first-generation connection, assembled with five M6 screws: three of 32 and two of 25. The Titan 2, released in 2026, is held by a pair of M8 screws, and F-One deliberately ruled out any adapter so as not to lose the stiffness the Titan 2 brings.
Which mast should you choose for the Jam HM Carbon plane?+
An F-One mast in Titan 1, aluminium or carbon: the F-One Alu Mast, the Carbon 16 Mast or the Carbon HM 14 Mast. If you already own one, it works as is.
What is in the box of the F-One Plane Jam HM Carbon?+
You get the Jam HM Carbon front wing with its integrated fuselage, the Tail Pumping XXS 200 stabilizer, an EVA bag, the screw set and its Torx key, plus the user guide. Mast and board are sold separately.
Can you start pump foil with the Jam?+
Yes, F-One opens it to riders discovering pump foil as well as to experts. Then choose your size according to your build and ease on the foil, using the brand's size guide.
More F-one on sale
See all ›What the F-One Plane Jam HM Carbon does
- Matched wing and stabilizer: The front wing and the Tail Pumping XXS 200 stabilizer come together, only the mast is left to add.
- Starts in a few pumps: In dock start as in pump foil, only a few pumps are enough to take off.
- Glide that lasts: You can catch your breath for a few seconds without pumping, the wing keeps its momentum.
- Efficient at low speed: It lifts early: useful in wing when the wind is light and in downwind when conditions are marginal.
- Monobloc HM carbon: Wing and fuselage are moulded as a single piece, with no play between the two.
Stabilizer, glide and construction of the Jam plane
Specifications of the Jam HM Carbon plane Titan 1
| Category | Plane: front wing with fuselage and stabilizer |
| Compatible mast | F-One Titan 1, aluminium or carbon |
| Material | Prepreg HM carbon, wing and fuselage in one piece |
| Stabilizer supplied | Tail Pumping XXS 200 |
| Sizes in the range | 1400, 1600 and 1900 cm² |
| Aspect Ratio | 10.3 (1400), 10.2 (1600), 10.5 (1900) |
| Wingspan | 120 cm (1400), 128 cm (1600), 140 cm (1900) |
| Front wing weight | 1.83 kg (1400), 2.03 kg (1600), 2.42 kg (1900) |
| Uses | Dock start, pumping, wing in light wind, SUP downwind |
| Target Audience | From first pump foil to expert level |
| To plan for | Mast and board |
Questions about the F-One Plane Jam HM Carbon (Titan 1)
Does the F-One Plane Jam HM Carbon Titan 1 fit a Titan 2 mast?
Which mast should you choose for the Jam HM Carbon plane?
What is in the box of the F-One Plane Jam HM Carbon?
Can you start pump foil with the Jam?
Size guide and original specifications: F-One Plane Jam HM Carbon on GlissEvolution.
Customer reviews
Loading reviews...