A gear drivetrain that handles dirt
The Evo-Spirit Nexus PRO CNC Edition swaps drive belts for metal gears and fits trucks cut from aluminum, so it handles dirt and rocks without throwing the drivetrain out of adjustment. The board is brand new and DealsEvolution lists it at a reduced price. On the power side, you get 6,400 W spread across two motors and a 648 Wh Samsung 50S battery.
It is aimed at riders leaving bike paths for dirt tracks, trails and descents on rough ground, at an easy or brisk pace. On private grounds, with the owner's permission, the Sport version rides with no limit; for public roads, only the Speed-Limited Version at 25 km/h comes into play, subject to the rules of your country. A beginner can get started by sticking to the gentle modes on the remote control. Evo-Spirit does not publish a max load, so heavier riders should judge by the range measured with a 70 kg rider.
Detailed description
A gear drivetrain that handles dirt
In the woods, a drive belt picks up twigs, grit and mud on every pass, then ends up slipping or going slack. On the Nexus PRO, high-strength metal gears take over and stay sealed in their housing: Evo-Spirit highlights maximum durability with minimal maintenance. There is a trade-off, and it is worth knowing before heading far out: if something breaks in the middle of a trail, you cannot rig a fix as easily as with a spare drive belt in your bag.
Optional footstraps for a locked-in stance
Footstraps are what set a mountainboard apart from an electric longboard. Once strapped in, you stay connected to the board on descents and when landing a jump, and the board follows your weight shifts instead of slipping out from under your feet. On the CNC Edition they are not fitted as standard: the Evo-Spirit Premium footstraps are ordered with the board, adjust to every shoe size and tighten with a ratchet. Give yourself a few rides to get used to having your feet held.
Sandwich deck, CNC trucks and Gold hardware
The deck stacks three plies of thin maple, two plies of thick bamboo and two layers of fiberglass, under a high-grip grip tape that is binding-compatible. Evo-Spirit tunes it for all-terrain riding: it absorbs without going soft. The machined aluminum trucks adjust from underneath with a 4 mm Allen key to stiffen or soften the bushings. Their position, inner or outer, tips the board toward agility or toward stability. Anodized Gold dresses the gear drive, the wheel mounting hardware and the hydro-dipped logo.
Two 6384 motors, 648 Wh battery and four-mode remote control
Two 140 KV 6384 brushless motors deliver 6,400 W together, driven by a 70 A ESC with regenerative braking. The 12S3P 15 Ah battery, built with Samsung 50S cells, is potted in resin along with the controller to better withstand the elements. The remote control, with a Gold aluminum shell, LCD screen and Bluetooth link, offers four modes that adjust acceleration and braking, including an Eco mode that caps the speed and softens take-offs.
Sport at 55 km/h or Speed-Limited at 25 km/h
The Sport version reaches a claimed 55 km/h, with no limiter, and ships without lights, horn or reflectors: it is not permitted on public roads, private grounds and tracks only. The Speed-Limited Version tops out at 25 km/h whatever the mode and comes with front and rear lights, an audible horn and reflectors already fitted. Motors, battery, deck, trucks, gear drive and claimed range are exactly the same. Each version is delivered with its EU declaration of conformity, to be kept with the invoice.
Two-year warranty and long-term parts support
The battery, motors, deck and labor are covered for 2 years. Evo-Spirit keeps parts available for at least 5 years after purchase, and up to 10 years for some: motor, controller, battery, gears, CNC trucks, bearings and rims can be replaced individually. The brand's workshop is based in Pornichet, at the same address as the GlissEvolution store, with a turnaround of three to five business days for a return.
Why this price
New item sold at a reduced price. List price 2,190 €, sale price 2,090 €: you save 100 € (-5%).
A real team behind it
DealsEvolution is run by GlissEvolution, a watersports shop in Pornichet. Same terms of sale, same after-sales service, free pickup at the shop.
Find usChoosing between the Sport and Speed-Limited versions
First decide where you will ride, because the version is set when you order and the speed limiting, programmed in the controller before shipping, is not removed after delivery. For private grounds or a track, with the owner's permission, the Sport keeps its full speed. If you plan to use public roads, you need the Speed-Limited Version, and Evo-Spirit points out that speed limiting alone does not make it permitted on the road: most countries also require a speed limit and specific equipment, so check the rules where you live before heading out. The brand makes a helmet mandatory on every ride, whatever the terrain.
Frequently asked questions
How many kilometers does the Nexus PRO CNC Edition cover off-road?+
The claimed 35 km was measured with a 70 kg rider on a bike path. Off the tarmac, grass, gravel, hills and repeated accelerations bring that figure down noticeably. Your weight, the outside temperature and the selected mode also play a part.
Does the 25 km/h speed limiting on the Nexus PRO apply to every mode?+
Yes. The cap is written into the board's controller: all four modes remain available and change how sharp the acceleration and braking feel, but the speed never goes above 25 km/h.
Which wheels can I fit on the Evo-Spirit Nexus PRO CNC Edition?+
Six sets fit: 6, 7 and 8-inch pneumatic tires, puncture-proof Airless 140 mm, street 115 mm and 105 mm. The setup cannot be chosen when ordering, and the other sets are sold as spare parts. For the street 115 mm, add riser pads.
Can I ride the Nexus PRO in a rain shower?+
The IPX3 rating protects it from falling rain: riding in a shower or on wet ground is expected, and a fault that follows is still covered. Riding through puddles, spray from underneath, water jets, immersion, storing the board wet or leaving salt on it after a ride by the sea are not covered by the warranty. The battery pack opens on the ground side, and water that gets in there does not drain out.
How do I maintain the gear drive and trucks on the Nexus PRO?+
Grease the gears from time to time and clear the dirt around the drivetrain after a ride in the woods. Check the tightness of the trucks and footstraps, the pressure in the tires and the condition of the bearings. Store the board away from frost, and do not leave the battery empty or fully charged for several weeks.
What is the difference between the Nexus and the Nexus PRO?+
Motors, battery, deck and claimed speed are identical. The PRO adds the gear drive, the Gold finishes and the CNC-shell remote control, and the CNC Edition adds the machined trucks on top. Gears need less maintenance, while the Nexus drive belt is easier to replace yourself and costs less as a part.
You might also like
See all ›Evo-Spirit Nexus PRO CNC Edition: key features
- Zero drive belts: Torque goes through enclosed metal gears, so there is no tension to reset after a muddy ride.
- Adjustable machined trucks: CNC aluminum in matte black, with adjustable bushing compression and position to tune the carving to your taste.
- Multi-layer deck: Thin maple, thick bamboo and fiberglass stacked for a flex that soaks up bumps without sagging.
- Recharge over a break: About 4 hours on the charger, enough to get back on it the same day.
- Gold finishes: Gold anodizing on the gear drive and the wheel mounting hardware, with a matching CNC-shell remote control.
The Nexus PRO CNC Edition electric mountainboard in detail
Nexus PRO CNC Edition mountainboard specifications
| Motors | 6 400 W, two 6384 brushless motors rated 140 KV |
| Drivetrain | Gear drive with metal gears, anodized Gold finish |
| Controller | 70 A ESC, regenerative braking |
| Battery | 12S3P, 15 Ah, Samsung 50S cells, 648 Wh |
| Charging | About 4 hours |
| Claimed range | Up to 35 km, 70 kg rider on a bike path |
| Speed | 55 km/h in the Sport version, 25 km/h in the Speed-Limited Version |
| Deck | 3 plies of thin maple, 2 plies of thick bamboo, 2 layers of fiberglass, high-grip grip tape, binding-compatible |
| Trucks | CNC machined aluminum, matte black, adjustable compression and position |
| Compatible wheels | 6, 7 and 8-inch pneumatic tires, Airless 140 mm, street 115 mm and 105 mm |
| Weight | 18.2 kg with all-terrain wheels |
| Remote control | CNC Gold aluminum shell, LCD screen, Bluetooth, four modes |
| Protection | IPX3, battery and controller potted in resin |
| Warranty | 2 years on parts, battery and labor |
Frequently asked questions about the Evo-Spirit Nexus PRO CNC Edition
How many kilometers does the Nexus PRO CNC Edition cover off-road?
Does the 25 km/h speed limiting on the Nexus PRO apply to every mode?
Which wheels can I fit on the Evo-Spirit Nexus PRO CNC Edition?
Can I ride the Nexus PRO in a rain shower?
How do I maintain the gear drive and trucks on the Nexus PRO?
What is the difference between the Nexus and the Nexus PRO?
Size guide and original specifications: Evo-Spirit Nexus PRO CNC Edition on GlissEvolution.
Customer reviews
Loading reviews...