Skip to Content

Searching ppc foiling in Screw Sets & Tools

Clearance foil screw sets and tools: screws, nuts, top plates, adapters and mounting parts from F-ONE, Duotone and PPC Foiling. Enough to never miss a session over a lost screw, as long as you check your foil's standard.

Learn more
PPC Foiling Foil Mast Chock Foil Mast Wedge - PPC Foiling - view 2 -17%

PPC Foiling Foil Mast Chock

The PPC Foiling chock holds the foil mast in position. It's used for mounting, adjustments and storage.
24.00 € 29.00 € Save 5 €

Foil screw set and tools: screws, T-nuts, plates and adapters

Updated November 2026

The foil screw set range covers screws, T-nuts, plates, mast feet, shims and tools from F-ONE, Duotone and PPC Foiling. Everything is new and never used. It sits within the foils section of DealsEvolution. Looking for the foil itself? Browse the wing foils and the kitesurf foils too. These parts arrive here at the end of a production run, with a crossed-out price showing the catalog price. A smart way to get kitted out before your next session, or to stock spares in your bag.

Which foil screw set suits your setup?

On an F-ONE foil, the standard is the M6 countersunk screw with a Torx T30 drive, in A4 stainless steel or titanium. Pick 25 or 32 mm, depending on your plate.

For nuts, you'll find M6 T-nuts and lockable versions. Duotone has screw sets for its own setups, and straps screws come in M6 or self-tapping.

Your gear decides which foil screw set you need. Tell us your mast and your board, and we'll confirm the length to order.

How do you stop seizing and corrosion?

Salt and repeated assembly are hard on a foil screw set. Put a stainless steel screw into an aluminum mast and galvanic corrosion will eventually lock the thread. The fix is simple: a dab of anti-seize gel on every thread before you assemble. It's the habit that saves a mast at the end of the season.

Tighten the screws in a cross pattern, without forcing them, and check them again after your first session. Rinse the foil with fresh water after every outing. If you leave it mounted on the board, take it apart from time to time.

You'll find anti-seize gel in this range, right next to the wrenches.

Which plate or mast foot do you need to switch boards?

A new board sometimes calls for a different plate. This range has F-ONE plates and mast feet. Choose according to your mast and the mounting type on your board.

The F-ONE adapter for Tuttle boxes turns the box into a rail plate. So you can run a rail foil on a board fitted with a Tuttle box, no need to change boards.

We can fit it for you at our Pornichet shop. To find the right part, start with the mast you own and the board you want to equip.

What does a mast shim do?

The PPC Foiling mast shim changes the angle of your foil. It's one of the adjustment parts in this range, alongside plates and mast feet.

Whenever you add a part to your setup, check the screw set is tight after the first session. Not sure which screws go with the shim? Tell us your mast and your board, and we'll guide you before you order.

Which tools belong in your board bag?

The range includes F-ONE Torx T30 and T40 keys, a hex screwdriver and a multi-tool. Pick the one that fits in your bag, and keep it with your foil at all times.

Slip in a spare T-nut and screw too. A nut lost in the sand or a screw seized by salt can keep you off the water. With the part in your bag, you still get your session.

Pack a little anti-seize gel in your kit for every reassembly.

How do you check compatibility before ordering?

Before you check out, note the brand and model of your mast, plus the plate or box type on your board. With those details, the right screw is easy to spot: M6, countersunk head or not, 25 or 32 mm for an F-ONE foil.

This range covers F-ONE, Duotone and PPC Foiling parts. Check that everything matches before you mix brands. All of it is new and never used.

Order online, or have the part fitted at our Pornichet store.

Foil screw set FAQ

Which screws for an F-ONE foil?

M6 screws with a countersunk head and Torx T30 drive, in A4 stainless steel or titanium, in 25 or 32 mm depending on your plate. Tell us which mast and board you have, and we'll confirm the right length.

What is anti-seize gel used for on a foil?

It prevents seizing and corrosion between a stainless steel screw and an aluminum mast. A dab on each thread every time you assemble is enough.

Can you mount a rail foil on a Tuttle board?

Yes. The F-ONE adapter for Tuttle boxes turns your Tuttle box into a rail plate.

Why buy end-of-line foil screw sets?

The parts are new and have never been used. The crossed-out price is the catalog price, and the discount comes from the model year change.

Where can you buy foil screw sets and have them fitted?

You can order online or drop by the Pornichet shop, where we fit them on site.

Why shop DealsEvolution?

DealsEvolution is the clearance site of GlissEvolution, a glisse shop based in Pornichet since 2005. Here you'll find brand-new gear from past seasons, never used, from the same big brands we sell in store. The crossed-out price is the GlissEvolution catalogue retail price. Split your payment with PayPal or Alma, and pick up your order at the shop for free.

Find Us

GlissEvolution store, 2c avenue du Gulf Stream, 44380 Pornichet (Loire-Atlantique). Phone: 09 62 64 74 77. Open Tuesday to Saturday, 10 am to 1 pm and 3 pm to 7 pm.

Our Partner Brands

DealsEvolution
4.9/5
★★★★★
1,204 verified reviews