Flexible boots to feel the board
Feeling the deck of the board as if you were barefoot, with 3 mm of neoprene around your foot: that is what the Atan Mistral 3 mm aim for. This new pair, listed at a reduced price, relies on a thin natural latex sole that grips. You keep precise footwork when surfing, kiting or windsurfing as the water cools down.
Demanding surf, kitesurf and windsurf riders who refuse to lose contact with their board when the water cools down. In technical surf, you keep feeling where you place your feet. In light strapless kitesurf, the thin sole sticks to the board. In windsurf in cool water, the neoprene keeps your foot warm throughout the whole session.
Detailed description
Flexible boots to feel the board
With the Atan Mistral 3 mm, your foot reads the surface of the board almost as if bare. The flexibility of the latex neoprene and the thinness of the sole let you pick up on every push: you correct your position at take-off, you reposition a foot on the edge of a kite board, you adjust your pressure in windsurf. The boot follows the movements of your foot instead of holding them back, which matters when you link maneuvers.
3 mm latex neoprene and inner and outer latex coating
The 3 mm of latex neoprene insulate your foot for riding in cold to mild water. You stay warm over a long session when the temperature drops, without feeling your foot cramped. The boot has a latex coating on both faces, inside and out: the brand presents it as a guarantee of immediate comfort and better durability.
Natural latex sole: the grip of the Atan Mistral 3 mm
Under the foot, a thin natural latex sole gives firm traction on the board, even on a wet deck. You feel the board and keep a grip that reassures you when you load up. Its thinness lets it slip under the straps without discomfort. Strapless, on a light-wind kite session or in surf, it is the sole that holds your foot in place when you move on the board.
Why this price
New item sold at a reduced price. List price 64.99 €, sale price 45 €: you save 19.99 € (-31%).
A real team behind it
DealsEvolution is run by GlissEvolution, a watersports shop in Pornichet. Same terms of sale, same after-sales service, free pickup at the shop.
Find usSize guide
| ATAN Size | Shoe size EU | Shoe size US |
|---|---|---|
| T00 | 34-35 | 4 |
| T0 | 36-37 | 5 |
| T1 | 38-39 | 6 |
| T2 | 40-41 | 8 |
| T3 | 42-43 | 9 |
| T4 | 44-45 | 11-12 |
| T5 | 46-47 | 13-14 |
| T6 | 48-49 | 15-16 |
Choosing the right Atan size between two shoe sizes
Atan sizes each span two shoe sizes (T0 for 36-37, T4 for 44-45, for example): find your box in the Atan size guide shown below the product. If you wear a half size, go down to the smaller size. A snug boot keeps that barefoot feel, insulates better and holds your foot without it moving around.
Frequently asked questions
Are the Atan Mistral 3 mm boots new?+
Yes, it is a new pair. You get the pair of boots alone, without care accessories.
What is the Atan size equivalent in US shoe size?+
T0 corresponds to 36-37 EU and 5 US, T4 to 44-45 EU and 11-12 US. The full chart is in the Atan size guide.
How do you care for latex neoprene boots?+
After every session, rinse them with clean water to remove salt and sand. Let them dry in the shade, away from direct sun, and use a neoprene cleaner if needed. Store them flat to protect the sole and the latex.
What should you wear with 3 mm neoprene boots?+
A wetsuit suited to the water temperature, a leash and a board, with or without straps depending on how you ride. For wetsuit thickness, the guide “Choosing your neoprene wetsuit” covers the question.
You might also like
See all ›What the Atan Mistral 3 mm bring on the water
- Barefoot feel: The boot is very flexible and lets the contact with the board come through.
- 3 mm latex neoprene: Insulation suited to cold to mild water, without restricting the foot.
- Natural latex sole: Thin and grippy, it grips the board and slides under the straps.
- Freedom of movement: The flexible construction lets your ankle and toes work normally.
- Latex on both sides: The inner and outer latex coating aims for comfort from the moment you pull them on.




Flexibility, insulation and grip of the Atan Mistral 3 mm boots
Atan 3 mm neoprene boots specifications
| Brand | Atan |
| Model | Mistral 3 mm |
| Type | Neoprene boots |
| Thickness | 3 mm, latex neoprene |
| Sole | Thin, natural latex, grippy |
| Build | Internal and external latex coating. |
| Feel | Barefoot feel, very flexible |
| Compatibility | Straps and strapless |
| Disciplines | Surf, windsurf, kitesurf |
| Water temperature | Cold to mild |
| Rider level | Demanding riders, looking for feel and protection |
| Range sizes | T0 (36-37), T4 (44-45) |
| Color | One colorway |
Size guide
Included / Not Included
- Included: pair of Atan Mistral 3mm boots
- Not included: care accessories
Frequently asked questions about the Atan Mistral 3 mm boots
Are the Atan Mistral 3 mm boots new?
What is the Atan size equivalent in US shoe size?
How do you care for latex neoprene boots?
What should you wear with 3 mm neoprene boots?
Original specifications: Atan Mistral 3 mm on GlissEvolution.
Customer reviews
Loading reviews...