Quad Lock and ribbed velour underfoot
A worn pad or a traction area to create: the AK Glue On Insert Pad is stuck down with 3M adhesive and takes an M6 stainless steel insert to hold your screws. Brand new, this set is discounted on DealsEvolution. Underfoot, the 4 mm Quad Lock and the 2.5 mm velour give grip without adding bulk.
This set is for riders of all levels who fit or repair their own pads. If your board takes glued pads and M6 inserts, it gives you the basic parts for a clean installation. For regular use at sea, the stainless steel and nylon stand up to salt. Looking for a low profile underfoot? The ultra-thin insert keeps the bump down.
Detailed description
Quad Lock and ribbed velour underfoot
The surface combines two textures. The 4 mm Quad Lock grooves grip the sole of your foot when you pull on your stance, and the 2.5 mm ribbed velour adds a softer layer that avoids pressure points. You keep a direct contact with the board, without a thick pad dulling the feel underfoot.
An M6 stainless steel insert in a nylon bushing
The mechanical heart of the set is an M6 threaded insert in stainless steel, mounted in a flexible nylon bushing. This setup stabilizes the fixing and holds the screws. The insert is ultra-thin, so it adds little thickness, and the stainless steel limits corrosion when you ride often at sea.
The 3M adhesive backing of the AK Glue On Insert Pad
All the hold comes from the high-grip 3M adhesive backing. It holds the pad against the hull shape and absorbs lateral loads while you ride. A badly prepared surface leads to early lifting, which is why installation takes a little care.
Compatibility with your board
The set fits most boards that accept glued pads and M6 inserts. Before you start, check the free space on the deck and the thickness you want underfoot. The combination of 3M, stainless steel and nylon makes it suited to marine use.
Why this price
New item sold at a reduced price. List price 180 €, sale price 144 €: you save 36 € (-20%).
A real team behind it
DealsEvolution is run by GlissEvolution, a watersports shop in Pornichet. Same terms of sale, same after-sales service, free pickup at the shop.
Find usGetting your glued pad on right
Installation is won before the gluing. Clean and degrease the area, then wait until it is fully dry before applying the 3M backing, pressing over the whole surface. Fit the M6 stainless steel threaded insert into its nylon bushing, and let the adhesive cure before putting load on it.
Frequently asked questions
How do you fit the AK Glue On Insert Pad?+
Prepare a clean, degreased and dry surface, then stick down the 3M backing, pressing hard for adhesion. Give the adhesive time to cure before loading the pad heavily.
Which board can you fit the AK Glue On Insert Pad Complete Traction Set on?+
On most boards that accept glued pads and M6 inserts. Check the available space and the thickness you want before fitting.
Does the stainless steel insert stand up to sea water?+
The insert is stainless steel and the bushing is nylon, materials that limit corrosion in a marine environment for lasting hold.
Is the AK Glue On Insert Pad new?+
Yes, the set is new. It includes the 3M adhesive backing, the M6 stainless steel threaded insert and the Quad Lock and velour pad, without straps or tools.
You might also like
See all ›More Ak on sale
See all ›Highlights of the AK Glue On Insert Pad
- 3M adhesive: The high-grip backing keeps the pad stuck down even under heavy use.
- M6 stainless steel insert: A threaded stainless steel insert, seated in a flexible nylon bushing that holds the screws.
- Ultra-thin profile: The insert reduces the bump underfoot without losing strength.
- Dual-texture grip: 4 mm Quad Lock grooves and 2.5 mm ribbed velour.

The AK Glue On Insert Pad Complete Traction Set in detail
Specifications of the AK Glue On Insert Pad traction set
| Type | Complete traction set, pad and fixing insert |
| Adhesive | 3M adhesive backing |
| Insert | M6 threaded stainless steel, ultra-thin |
| Pad | Flexible nylon |
| Grooves | Quad Lock 4 mm |
| Velour | Ribbed 2.5 mm |
| Disciplines | Pads, inserts, fixings |
| Rider level | All levels |
Included / Not Included
- Included: complete GOIP traction set (3M adhesive backing, M6 stainless steel threaded insert, pad with 4 mm Quad Lock + 2.5 mm velour)
- Not included: straps, board, installation tools
Frequently asked questions about the AK Glue On Insert Pad
How do you fit the AK Glue On Insert Pad?
Which board can you fit the AK Glue On Insert Pad Complete Traction Set on?
Does the stainless steel insert stand up to sea water?
Is the AK Glue On Insert Pad new?
Size guide and original specifications: AK Glue On Insert Pad on GlissEvolution.
Customer reviews
Loading reviews...